Support Center / Replacement Parts / How Do I Read the Label and Serial Number on an Older Ella Tub?
Back to Replacement Parts

How Do I Read the Label and Serial Number on an Older Ella Tub?

On an older Ella tub the label sits on the inside of one of the removable panels, usually behind the magnetic access panel next to the door, and it carries the testing laboratory mark, the standard the tub was tested against, the model and the serial number. Ella serial numbers typically begin with the letter M followed by digits, for example M0189, and that is the number the team reads to see when the tub was made and which replacement parts are compatible. How do I find and decode the model number on my Ella tub? explains the model tag and the spec sheet, and this page stays with the older label itself: where it is, what each number means, and how the short codes on old paperwork translate to a model name.

Where the Label Is on an Older Tub

The serial label is on the inside of one of the removable panels, so nothing has to be taken apart to reach it. There are two places to check.

  • Behind the magnetic access panel next to the door. This is the usual spot. Pull the magnetic panel beside the door away from the frame and look at its inside face and the area behind it.
  • Inside the large access panel on the seat side. On some tubs, including the stainless steel door models, the label is behind the large panel on the seat side of the front apron.

Check both before you decide the label is missing. A separate yellow model tag on the back of the unit lists the model code and the configuration the tub was built with, but on an installed tub the back is rarely reachable, which is why the label inside the panel is the one to look for.

When you find the label, photograph the whole thing instead of copying one line. A clear, well lit photo of the full label is more useful than a number written from memory, because it lets the team read every line the way it was printed.

What Each Line on the Label Means

An older label usually shows several numbers, and they do different jobs.

  • The testing laboratory mark and the standard. The label carries the mark of the laboratory that tested the tub and the standard it was tested against. These identify the certification, not your individual tub.
  • The model. This is the model or item code for the tub. On an older unit it may be a short letter and number code and not today's model name.
  • The serial number. Ella serial numbers typically begin with the letter M followed by digits, for example M0189. This is the number that identifies your individual tub.
  • The manufacture date. One of the other numbers on the label is often the manufacture date, printed as a date. People frequently send that number thinking it is the serial.

Because the date and the serial sit close together, the safest habit is to write down every number on the label and let the team pick out the right one. The serial video on this page explains why that number matters: the information on the label lets the team see when the tub was made, who made it, and which replacement parts are compatible.

Older Codes on Invoices and Crates, and the Models They Refer to

Older invoices and shipping crates often show a short letter and number code where you would expect a model name. The team decodes those, and these are the ones that come up most often.

  • 93107 and 93108. The Elite hydro model, with left hand and right hand door and drain.
  • 93117. A code that appears on Royal paperwork.
  • 93217 and 93218. The Ultimate.
  • HA310L and HA310R. The Elite.
  • HA305 or G305. The Deluxe.

If your paperwork shows a code that is not on this list, send it exactly as printed along with the label photo. Support can translate older codes to the current model, and a code that looks unfamiliar to you is often enough for the team to place the tub.

If the Label Is Missing, Faded or Hard to Read

A tub can still be identified without a readable label. The support team can usually tell which model it is from photos, exterior measurements and whatever numbers remain. Is My Unbranded Walk-In Tub an Ella, and Which Model Is It? covers that route in full, and the short version is this.

  1. Measure the exterior length, width and height of the tub in inches. Ella models are identified by these sizes.
  2. Note the door. Does it swing inward into the tub or outward into the room, and is it on the left or the right as you face the tub?
  3. Photograph the whole tub from the front, the door and its latches, the control buttons or dial, the faucet, the drain area and whatever is left of the label.
  4. If you can reach the underside through an access panel, photograph the pump, the blower and any tags on them.

When a tub matches a model, support confirms it and sends the link to that model's product page, where the manual and the spec sheet live. If the original order can be located, it can also show which therapy systems the tub was built with.

What to Send, and What the Serial Unlocks

The serial tells the team when the tub was made and which replacement parts are compatible, so the most useful thing to send is a photo of the full label together with a photo of the part you need. Ella has updated many parts and specifications over the years, so the current spec sheet for a model may not match an older unit in every detail, and a clear photo of the part is the most reliable guide.

Send the photos through ellasbubbles.com/support, or contact your Ella dealer or the team at (800) 480-6850, and include these details.

  • The photo of the full label, plus any code from an old invoice or crate.
  • Photos of the part and a wider shot of where it sits.
  • Where the tub was purchased and whether you are the original owner.
  • A street address, since parts ship by UPS and cannot go to a PO box.

In most cases parts are still available for an older tub, and technical support continues for the life of the tub. A serial that indicates 6 or more years of age may point to parts that are no longer stocked, and the team then confirms a current equivalent or a substitute. Are Parts Still Available for My Older Ella Tub? explains how legacy requests are handled case by case, and Does Ella's Bubbles Sell Replacement Parts for Walk-In Tubs? covers why every part is matched from the model and serial instead of a public catalog. The warranty stays with the first purchaser at the original address, so parts for a later owner are supplied outside the warranty.

One more thing to know about an older label or sticker: a phone number printed on it, or in the manual that came with the tub, may have been retired over the years. If that number does not connect, The Tech Support Number I Have Is Not in Service. How Do I Reach Ella's Bubbles? confirms the current ways to reach the team.

Video

Watch: Ella's Bubbles: Serial Number Location with chapters and a full transcript.

Common Questions

What does an Ella tub serial number look like?
Ella serial numbers typically begin with the letter M followed by digits, for example M0189. The serial is printed on the label inside one of the removable panels, usually behind the magnetic access panel next to the door. It is a separate number from the manufacture date printed on the same label.
Where is the serial label on an older Ella tub?
The label is on the inside of one of the removable panels. It is usually behind the magnetic access panel next to the door, and on some tubs it is inside the large panel on the seat side of the front apron. Check both places and photograph the whole label.
Is the date on the label the same as the serial number?
No, they are two different numbers. One of the numbers on the label is often the manufacture date printed as a date, and people frequently send it thinking it is the serial. Write down every number on the label, or send a photo of the full label, and the team will pick out the right one.
What do codes like 93107 or HA310L on my paperwork mean?
They are older model codes that appear on invoices and crates in place of today's model names. 93107 and 93108 are the Elite hydro model with left hand and right hand door and drain, 93117 appears on Royal paperwork, 93217 and 93218 are the Ultimate, HA310L and HA310R are the Elite, and HA305 or G305 refers to the Deluxe. Send any other code exactly as printed and the team will decode it.
What can Ella tell from the serial number on my tub?
The serial lets the team see when the tub was made, who made it, and which replacement parts are compatible. That is why the team asks for the serial and not the model name alone when a part is needed. A photo of the full label together with a photo of the part is the most useful thing to send.
What should I do if my tub label is missing?
Send photos of the whole tub, the door and latches, the controls, the faucet and the drain area, along with the exterior length, width and height in inches, through ellasbubbles.com/support. Note whether the door swings inward or outward and which side it is on as you face the tub. The support team can usually identify the model from those details.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket