Centre d'assistance / Vidéos / Dépannage et réparations / Ellas Bubbles: Two Piece Faucet Cartridge Replacement
Back to Troubleshooting & Repairs

Ellas Bubbles: Two Piece Faucet Cartridge Replacement

Published Novembre 2023 · 1:33 · 4 chapters

Ellas Bubbles: Two Piece Faucet Cartridge Replacement
Chapters in this video
  1. 0:00 Remove Spout Handle The technician removes the decorative bolt cover, loosens the allen bolt, and lifts off the spout handle.
  2. 0:21 Remove Old Cartridge The technician unscrews the escutcheon plate, loosens the brass locking collar, and lifts out the old cartridge.
  3. 0:38 Install New Cartridge The technician aligns the guide posts, seats the new cartridge, and tightens the brass locking collar.
  4. 1:02 Reassemble Faucet The technician hand tightens the escutcheon plate, replaces the faucet handle, tightens the allen bolt, and replaces the bolt cover.

A technician demonstrates how to replace the cartridge on an Ella two-piece faucet set, addressing issues like faucet drips or a stiff handle.

The video begins by showing how to remove the spout handle of an Ella two-piece faucet. This involves taking off the decorative bolt cover, loosening the allen bolt with a three millimeter allen wrench, and then lifting the handle. This step reveals where the allen bolt is attached.

Next, the technician removes the old cartridge. This process includes unscrewing the escutcheon plate, loosening the brass locking collar, and lifting out the cartridge. When installing a new cartridge, it is important to align the two guide posts with the receptacles in the spout housing so the cartridge seats correctly. The brass locking collar is then replaced and tightened securely without over-torquing.

Finally, the faucet is reassembled. The escutcheon plate is hand-tightened, the faucet handle is placed back onto the cartridge, and the allen bolt is tightened securely without over-torquing. The bolt cover is then replaced, ensuring the red side is on the left for hot water and the blue side is on the right for cold.

  • 3 mm allen wrench
  • Decorative bolt cover
  • Spout handle removal
  • Escutcheon plate
  • Brass locking collar
  • Cartridge replacement

Step by step help for this topic: Faucet drips or the handle feels stiff: replacing your faucet cartridge step by step, Why Does My Tub Faucet Drip Constantly and How Do I Fix It? and Why Does My Faucet Handle Keep Falling Off?.

Video transcript1 paragraph · 1:33

first remove the decorative bolt cover and insert a three millimeter allen wrench and loosen the allen bolt lift off the spout handle here you can see where the allen bolt is attached unscrew and remove the escutcheon plate loosen and remove the brass locking collar and then simply lift out the cartridge when replacing the cartridge make sure the two guide posts line up with the receptacles in the spout housing the cartridge will seat correctly when the two guide posts are in the correct position replace and tighten the brass locking collar tighten securely without over torquing replace and hand tighten the escutcheon plate the faucet handle back onto the top of the cartridge and tighten the allen bolt securely without over torquing finally replace the bolt cover the red side should be on the left for hot and the blue should be on the right for cold

Guides that use this video

More Troubleshooting & Repairs videos

More Troubleshooting & Repairs videos →    All videos →    Watch on YouTube →

Toujours bloqué ?

Ouvrez un ticket et nous nous occupons du reste.

Ouvrir un ticket d'assistance