Ella's Bubbles: Digital Touchpad Replacement

A technician demonstrates how to replace a faulty Ella's Bubbles walk-in tub digital touchpad. The process involves removing the old pad, connecting and testing a new unit, and then sealing it in place.

Replacing an Ella walk-in tub digital touchpad begins with protecting the tub's surface. The technician carefully cuts the seal around the old pad and pries it away from the tub, taking care not to damage the tub's surface. The old pad is then lifted out and its plug disconnected.

A new digital touchpad is connected, and power is temporarily reconnected to the walk-in tub to confirm the new pad functions correctly. The backing from the new unit's two-sided tape is removed to expose the adhesive. The new unit is set into place and pressed firmly.

Finally, all edges of the new digital touchpad are sealed with white silicone and smoothed. This procedure addresses issues where the digital touchpad is not responding or has failed, allowing for a part replacement without replacing any pumps.

• Protect tub surface
• Cut old seal
• Disconnect old pad
• Connect new pad
• Test new pad
• Seal edges with silicone

Step by step help for this topic: Touchpad or push button controls not responding: checks, repair, and replacement, Push Button Controls vs the Digital Touchpad: Operating Every Deck Control and Every Repair Video in One Place: Drains, Faucets, TCV, Buttons, Control Boxes, Touchpads, Doors and Ozone.