Ella's roll-in wheelchair accessible acrylic shower bases come in three standard sizes: 30 by 60 inches, 32 by 60 inches and 36 by 60 inches, each with the drain position, left or right, chosen when you order. A seat is optional on every one of them. Folding benches and seats rated from 300 to 600 pounds can be added, and the 36 by 60 base can be ordered with a molded seat. If the style itself is new to you, start with What is a roll-in shower and who should get one? and then come back here to match a size and a seat to your bathroom.
Standard Sizes and Seat Options at a Glance
All three standard bases share a 60 inch length. The width is the only dimension that changes, and the width is also what decides whether a molded seat is on the menu. The fourth row covers the made-to-order route for a space that none of the three standard footprints suits.
| Roll-in base | Width | Length | Drain position | Seat options | Best for |
|---|---|---|---|---|---|
| 30 by 60 standard | 30 inches | 60 inches | Left or right, chosen at order | Optional folding bench or seat rated from 300 to 600 pounds. Molded seat: not listed | The narrowest standard footprint, for a bather who stays in a wheelchair or shower chair |
| 32 by 60 standard | 32 inches | 60 inches | Left or right configurations | Optional folding bench or seat rated from 300 to 600 pounds. Molded seat: not listed | The middle width, offered as a barrier-free base in left and right configurations |
| 36 by 60 standard | 36 inches | 60 inches | Left or right, chosen at order | Can be ordered with a molded seat, or fitted with a folding bench or seat rated from 300 to 600 pounds | The widest standard base and the one to ask about when you want a seat built into the base |
| Custom rectangular | Up to 44 inches | Up to 80 inches | Left, right or center, at least 9 inches from each wall | Molded seat: not listed. Ask the team about a folding seat for your layout | An opening that none of the three standard sizes fits |
What the differences mean for you: every standard base is the same length, so the choice comes down to how much width your bathroom can give and whether you want the seat to be part of the base. If a built-in seat matters, the 36 by 60 base is the standard size published with a molded seat. If the bather will stay in their own wheelchair or shower chair, any of the three widths works with no seat at all, and a folding bench or seat can still be added for a family member or caregiver who prefers to sit. A drain that has to sit in the center of the floor points you toward a custom base, because the standard bases are ordered with a left or right drain.
Which Bases Have a Seat, and Why a Seat Is Optional
A roll-in base is designed so a wheelchair or shower chair rolls straight in with no lip to step or roll over. For that reason, many bathers never need a seat in the shower at all. They stay seated in the chair they arrived in. That is why the seat is treated as an option to add and not as a standard part of each roll-in base.
When you do want a place to sit, there are two published routes:
- Folding benches and seats. These are rated from 300 to 600 pounds and can be added to a roll-in shower. A folding seat suits a household where one person rolls in and another prefers to sit.
- A molded seat. The 36 by 60 base can be ordered with a molded seat, so the seat is formed as part of the base itself.
It also helps to know that Ella offers two base styles overall: wheelchair roll-in shower bases and seat shower bases. Deciding between those two styles is the first planning step, and Shower Bases and Walls: Roll-In, Seat, Custom Sizes, Thresholds and Wall Systems pulls the choices together alongside the wall systems. For caregiver-assisted bathing, the roll-in shower can also be paired with a weighted anti-bacterial nylon curtain, a stainless curtain rod and a slide bar with hand shower.
What Every Standard Roll-In Base Has in Common
Whichever width you choose, the three standard bases share the features that make a shower a true roll-in shower:
- A curb-less pan. All three are ADA curb-less roll-in pans, so there is no threshold to step or roll over.
- A low beveled entry. AcrylX barrier-free bases have a beveled roll-in entry of 3/4 inch to 1 1/8 inch depending on size. By comparison, one-piece and three-piece shower stalls have a 4 inch threshold.
- A collapsible shower dam. Every roll-in barrier-free base ships with a self-adhesive collapsible rubber dam that flattens under wheels and springs back to keep water in the stall. The video on this page shows the dam being measured, cut, pressed into place against the wall and floor, sealed with a thin bead of silicone on both sides, and then holding water in the stall.
- A finished acrylic surface. The pans are finished acrylic, so they need no tile and are ready to use once installed.
- A drain position you choose. The drain position is specified at the time of order, so the base can match the drain line already in your floor.
The base is ordered on its own. A complete roll-in shower is put together from the base in your size and drain position, a wall system sized to the base, and accessories such as grab bars or a shower door. Wheelchair Accessible Shower Base Sizes, Drain Positions, and What Is Sold Separately lists what ships with the base and what is a separate item.
When None of the Three Standard Sizes Fits
If your opening is shorter, longer or wider than the standard footprints, a rectangular base can be made to your dimensions, up to 44 inches wide by 80 inches long. The drain on a custom base can be placed left, right or center, and it must sit at least 9 inches from each wall. Only rectangular sizes are made, so bases with angled or curved edges are not offered. Custom bases are made for three-wall alcoves and for corner installations, and the team asks which layout you have so the drain and edges are placed correctly.
One difference to plan for: a custom shower base typically has a threshold of about 3 inches, while zero threshold bases sit flush with the surrounding floor for a barrier free entry. If rolling straight in is the goal, say so when you describe your project so the right base type is confirmed. The limits and examples are explained in Who Makes Custom Shower Pans and Bases for Accessible Showers?.
What to Have Ready Before You Choose
- Measure the finished opening, not the framing, and write down the width and the length.
- Note where the existing drain line sits in the floor, so the left or right drain position can be matched to your size.
- Decide who will use the shower. A bather who stays in a wheelchair or shower chair may not need a seat, while a bather who transfers will want a folding seat or the molded seat on the 36 by 60 base.
- Think about walls. A wall system is sized to the base, with choices such as a plain white acrylic three-piece panel kit, a CNC engraved pattern in acrylic, or a marble-look three-piece panel kit.
- Share your exact opening, drain location and seat preference with your Ella dealer or the team at (800) 480-6850, or open a ticket at ellasbubbles.com/support. They will confirm the size, drain position and seat option that fit your space.

Watch: The Ella Shower Dam, Keep Water In, Roll In With Ease | Ella's Bubbles with chapters and a full transcript.
Related Guides
- Which Ella shower kits fit a 36x60 space with wheelchair access?
- Shower Base Sizes and Thresholds Compared: AcrylX Barrier-Free, SMC Linear-Drain, Molded-Seat and Cultured Marble Bases
- Custom-Size Shower Bases: Size Ranges, Threshold Options, Drain Placement Rules, Construction, and How to Request One