Support Center / Plumbing & Electrical / Is an ETL Listed Walk-In Tub Accepted in Canada by Inspectors?
Back to Plumbing & Electrical

Is an ETL Listed Walk-In Tub Accepted in Canada by Inspectors?

ETL is the mark of Intertek, an independent testing laboratory, and for a Canadian installation the detail that matters is whether the product was evaluated to the Canadian requirement, which is what the small "c" in cETL shows. Ella walk-in tubs answer the Canadian question with a named Canadian standard: every tub is built to conform to CSA Standard C22.2 No. 218.2 alongside UL Standard 1795, and the pumps, in-line heaters and other electrical components inside are ETL certified and clearly marked. The two marks are compared in What Is the Difference Between ETL Listed and CSA Certified?, and this page focuses on what a Canadian inspector looks for and how to have it ready before the inspection.

What the ETL Mark Tells a Canadian Inspector

An ETL mark means that Intertek evaluated the product against a published safety standard, authorized its mark, and entered the product in a public directory where it can be traced. Listed and certified are two words for that same idea. In the United States, OSHA recognizes qualifying laboratories as Nationally Recognized Testing Laboratories, and UL and Intertek both appear on that list, which is why an inspector there accepts a UL or ETL mark as evidence of third-party testing.

Canada adds one more question: which standard was the product tested against? Two facts from Ella's documents explain how that question is answered.

  • The small "c" in cETL shows that Intertek evaluated the product to the Canadian requirement. A cETL mark is the ETL mark speaking to a Canadian inspector.
  • CSA Group is the laboratory that publishes the Canadian standards themselves. That is why a Canadian inspector so often asks for a CSA number instead of a mark from another laboratory.

So the difference between ETL and CSA is not in the strength of the word. It is in which laboratory did the evaluation and which standard the product was tested against. When an electrician or inspector asks whether a tub is ETL or CSA, the useful reply names the standard as well as the mark.

What an Ella Installation Carries for Canada

When a Canadian customer's inspector has asked, the team's standard wording has been: "Conforms to UL STD 1795 Hydro Massage Tub and CSA STD C22.2 No. 218.2." The table below sets out which standard or mark Ella documents name for each part of an installation.

Part of the installationStandard or mark named in Ella documentsWhat it means for a Canadian inspection
Tub as a wholeConforms to UL STD 1795 and CSA STD C22.2 No. 218.2The Canadian standard for hydromassage bathtub equipment is named directly, so the inspector has a CSA number to check
Pumps, in-line heaters and other electrical componentsETL certified and clearly markedEach component carries its own mark and can be traced in the laboratory's directory
Ella faucetsCSA B125.1The Canadian standard that covers faucets
HoistAssistCSA B45.5 and cETLA plumbing fixture standard plus the ETL mark evaluated to the Canadian requirement
cUPCnot listedCall the team with your model and faucet package before the inspection if your inspector names it

What this means for you is that an Ella tub does not rest on the ETL mark alone. The whole tub is described by a Canadian standard number, and the ETL marks sit on the individual electrical components inside it. If your inspector wants a CSA reference, the conformance wording supplies it. If the inspector wants to see marks on the equipment, the components are marked and easy to reach. The one item the published wording does not name is cUPC, and that is covered in Are Ella Walk-In Tubs CSA or cUPC Certified for Canadian Codes?.

Where to Find the Proof on the Tub Itself

The listing information an inspector wants to see is printed on the label inside the tub. Look inside the access panel on the front apron, on the seat side next to the door. That label carries the listing information together with the model and the serial number. The team calls it the UL label, and Ella tubs can be looked up on the UL website.

The ETL marks are on the components themselves. Our electrical installation video states that every electrical component is ETL certified, clearly marked and easy to reach, so an electrician or inspector can read the marks on the pumps and in-line heater with the access panel open. A walk through of each line on the label is in What a UL, ETL or CSA Listing Covers and How to Read the Label on a Walk-In Tub.

How to Prepare for a Canadian Inspection

  1. Ask your inspector which standard or mark they need to see. A request for a CSA number and a request for cUPC are two different questions, so it helps to know which one you are answering.
  2. Give the inspector the conformance wording for the tub: "Conforms to UL STD 1795 Hydro Massage Tub and CSA STD C22.2 No. 218.2."
  3. Open the access panel on the front apron and photograph the label, so the listing information, model and serial number are on hand before the visit.
  4. Show the marks on the pumps and in-line heater while the panel is open.
  5. If your order includes an Ella faucet or a HoistAssist, note that the faucet lists CSA B125.1 and the HoistAssist lists CSA B45.5 and cETL.
  6. If the inspector names cUPC specifically, call the team at (800) 480-6850 with your model and faucet package before the inspection date, so nothing is held up on site.

What a Certification Mark Does Not Decide

Certification marks describe the equipment. They do not replace a licensed electrician or your local code requirements, and they do not change the wiring rule that every jetted Ella tub needs its own dedicated GFCI protected circuit. The breaker box must use GFCI protected breakers with the appropriate amperage value for the tub's components, and your licensed electrician confirms that on site.

It also helps to keep the three words straight when you talk with an inspector. Conforms to means the tub was designed and built to meet the named standard, and it is the wording Ella uses for the whole tub. Certified is the word used for the ETL marked components, which carry the mark and can be traced in the laboratory's public directory. Listed is the same kind of assurance, a product evaluated against a named standard and entered in a directory. The full list of marks on Ella tubs and faucets is in Safety Certifications on Ella Tubs and Faucets, and if any question remains you can reach the team through ellasbubbles.com/support or at (800) 480-6850.

Common Questions

What does the small c in cETL mean?
The small "c" in cETL shows that Intertek evaluated the product to the Canadian requirement. ETL is Intertek's mark, and the "c" is what tells a Canadian inspector which requirement the evaluation covered. In Ella documents, the HoistAssist lists cETL together with CSA B45.5.
Which Canadian standard does an Ella walk-in tub conform to?
Every Ella walk-in tub is built to conform to CSA Standard C22.2 No. 218.2, the Canadian standard for hydromassage bathtub equipment, alongside UL Standard 1795. The team's wording for an inspector is "Conforms to UL STD 1795 Hydro Massage Tub and CSA STD C22.2 No. 218.2."
Why does my Canadian inspector ask for a CSA number?
CSA Group is the laboratory that publishes the Canadian standards themselves, so a Canadian inspector often asks for a CSA number instead of a mark from another laboratory. For an Ella tub the number to give is CSA C22.2 No. 218.2. Ella faucets list CSA B125.1, and the HoistAssist lists CSA B45.5.
Where is the listing label on an Ella walk-in tub?
The label sits inside the access panel on the front apron, on the seat side next to the door. It carries the listing information along with the model and the serial number. The ETL marks are on the pumps, in-line heaters and other electrical components themselves.
What should I do if my inspector asks for cUPC?
The conformance wording Ella publishes names UL, ETL and CSA standards, and cUPC does not appear in it. That is not a statement either way about your installation. Call the team at (800) 480-6850 with your model and faucet package before the inspection so the details for your exact tub can be confirmed.
Does an ETL or CSA mark replace a licensed electrician?
No. Certification marks describe the equipment, and they do not replace a licensed electrician or your local code requirements. Every jetted Ella tub still needs its own dedicated GFCI protected circuit, connected by your contractor.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket