Support Center / Sizes, Fit & Measuring / Can I Get a DWG or CAD File of an Ella Walk-In Tub?
Back to Sizes, Fit & Measuring

Can I Get a DWG or CAD File of an Ella Walk-In Tub?

Ella's Bubbles does not provide CAD, DWG, DXF or Revit files for its walk-in tubs, so there is no native file to drop into a drawing set. What is published instead is a dimensioned PDF drawing for every model, opened with the Drawings button on the product page, with the spec sheet and the owner's manual in the Downloads section of the same page. Find Your Manual, Spec Sheet, Schematic, and Drawings by Model maps each document to its tub family, and this page explains what the drawing files contain and how to plan from them when a CAD file is not available.

The Formats Ella Publishes, Side by Side

Architects, designers and contractors usually ask for a DWG because they want dependable figures for a plan. The same figures are published, just as PDF documents. The table shows each format, whether it exists, and where to find it.

FormatAvailableWhere to find itWhat it gives you
CAD, DWG, DXF or Revit fileNoNot provided for any modelNothing to import, so plan from the PDF figures
Dimensioned PDF drawingYesDrawings button on the product pageThe outside and inside dimensions of the tub in inches
Spec sheet PDFYesDownloads section, Download Specifications linkLeft and Right drawing pages, then the shared faucet and package pages
Owner's manual PDFYes, electronic onlyDownloads sectionOne manual per door family, covering several tubs
Digital catalog PDFYes, on requestSent by the team as a download linkThe full lineup for comparing models before you pull a drawing

What the differences mean for you is simple. The dimensioned PDF is the working document, and the current specification drawing for your model is the authority on its dimensions. Your designer or contractor reads the inch figures from that drawing and builds them into the plan, because no native model of the tub can be imported. The Downloads section on the same page also holds the operating and cleaning instructions and the warranty form, so everything for one tub sits in one place.

How the Left and Right Drawing Pages Work

The most useful change for anyone drawing a bathroom is that the spec sheets are now published by hand. This covers all 23 walk-in tub models: the inward-swing door tubs (Elite, Deluxe, Petite, Royal, Ultimate, Ultra, Zen, Zen60, Standard, Standard60 and Flow), the wheelchair transfer tubs (Transfer 26, Transfer 30, Transfer 32, Transfer 60 and Transfer XXL) and the outward-swing U-shape door tubs (Big4One, Capri, Front Entry, Lounger, Mobile, Monaco and Shak).

  • In each sheet the Left drawing pages come first. Left means the door, drain and faucet are on the left as you face the tub.
  • The Right pages follow.
  • The shared faucet and package pages come last.

You do not have to sort through both hands yourself. Choose Left or Right under Door and Drain Position on the product page, and the Download Specifications button switches to the single-hand file, so the PDF you pass to your plumber or designer shows only the tub you are planning for. If a sheet you have still shows a single drawing, it can be read mirrored for the opposite side. The measurements are identical, and only the drawing flips.

What the Dimensioned Drawing Shows

Pages two and three of a spec sheet are usually the dimension drawings. Every Ella walk-in tub is published with three outside dimensions:

  • Width is the short side that runs from the front of the tub to the back wall.
  • Length is the long side that runs along the wall.
  • Height runs from the floor to the top of the rim.

The drawing also carries the inside dimensions a bather cares about: the seat width, the seat height, the width of the door opening and the measurement across the front of the tub where the door sits. These vary from model to model, so read them from the drawing for the exact tub you are considering instead of from a family overview. The labels matter too. Listings usually give the figures as width, length and height, but the order can vary, and the guide to which figure is the width, the length and the height shows how to read them without mixing up the short side and the long side.

Planning from the PDF: Actual Size Against Nominal Size

Since you are entering figures by hand, take them from the drawing and not from the model name. The size in a model's name is a rounded nominal figure. A few verified examples show the gap:

  • The Ella Petite is marketed as a 28-inch tub, and its actual size is 27.5 inches wide, 52 inches long and 35 inches high.
  • The Ella Elite is 30 inches wide, 52 inches long and 35 inches high.
  • A tub described as a 5-foot tub can measure 59.5 inches on the drawing.

Those half-inch differences are normal rounding in the product name, not an error in the drawing, but they matter when an alcove, a doorway or a drain location is tight. Measure all three against the actual inch values. When a metric figure printed beside an inch figure on a spec sheet disagrees with it, the inch figure is the correct one. If you are still choosing between tubs, walk-in tub dimensions by model lists the exterior sizes and seat widths for every family, from the compact Mobile at 26 inches wide by 45 inches long up to the ShaK at 36 inches wide by 72 inches long, so you can shortlist a model before opening its drawing.

When You Need More Than the PDF Shows

A few practical notes save time when you are collecting documents for a project.

  • Most spec sheets live in family folders, but a few, including the Elite, Monaco and Mobile, sit in dated upload folders. Use the Download Specifications link on the product page so you always open the current file.
  • Owner's manuals are written per door family, so one PDF covers several tubs, and manuals are electronic only.
  • The HomeCare 32x60 has one combined spec-and-install document.

If you need a measurement the PDF does not show, send the model name through ellasbubbles.com/support or call (800) 480-6850, and the team will look it up on the drawing for you. If you need anything beyond the dimensioned PDFs, open a ticket with the model and the team will tell you what is available. Dealers have one more resource: the current catalog is shared as a digital PDF, and dealers with an account can reach product files through the contractor portal, as Personalized Dealer Catalogs and Print-Ready Brochure Files explains.

Video

Common Questions

Does Ella's Bubbles provide DWG or Revit files for its walk-in tubs?
No. Ella does not provide CAD, DWG, DXF or Revit files for its walk-in tubs. The published drawings are dimensioned PDF drawings, available from each product page.
Where do I download the dimensioned drawing for my tub model?
Open the product page for your model and use the Drawings button, which opens a dimensioned PDF. The Downloads section on the same page holds the spec sheet and the owner's manual. Pages two and three of a spec sheet are usually the dimension drawings.
How do I get the drawing for a left or a right door?
Choose Left or Right under Door and Drain Position on the product page, and the Download Specifications button switches to the file for that hand only. In the full spec sheet the Left pages come first, then the Right pages, then the shared faucet and package pages.
Can I use a single drawing for the opposite door side?
Yes. A sheet that still shows a single drawing can be read mirrored for the opposite side. The measurements are identical for both hands, and only the drawing flips.
What if the PDF drawing does not show the measurement I need?
Send the model name through ellasbubbles.com/support or call (800) 480-6850. The team will look up the measurement on the drawing for you and tell you what else is available for that model.
Should I plan from the model name or from the spec drawing?
Plan from the spec drawing. The size in a model's name is a rounded nominal figure, so a tub marketed as 28 inches can measure 27.5 inches. When a metric figure and an inch figure on a spec sheet disagree, the inch figure is the correct one.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket