Yes. What exists for walk-in tubs is independent safety certification, not a star rating: Ella walk-in tubs are built to conform to UL Standard 1795 for hydromassage bathtubs and CSA Standard C22.2 No. 218.2, and the pumps, in-line heaters and other electrical components inside the tub are ETL certified and clearly marked. UL, Intertek (ETL) and CSA Group are independent laboratories, and What a UL, ETL or CSA Listing Covers and How to Read the Label on a Walk-In Tub shows where the label sits on your tub. This page explains what that certification means, what it does not cover, and how to compare any walk-in tub brand fairly, including the ones advertised on television.
Certification, Not a Rating
People often search for a rating that ranks walk-in tubs from best to worst. The sources behind this knowledge base do not describe a rating of that kind. What they describe is safety certification: an independent laboratory evaluates a product against a published safety standard, authorizes its mark, and enters the product in a public directory where anyone can look it up.
Three laboratories matter for a walk-in tub. UL publishes UL 1795, the standard for hydromassage bathtubs, and runs the directory where Ella tubs can be looked up. Intertek applies the ETL mark to products tested to published standards. CSA Group publishes the Canadian standards, including C22.2 No. 218.2 for the tub. In the United States, OSHA recognizes qualifying laboratories as Nationally Recognized Testing Laboratories, and UL and Intertek both appear on that list. That is why an inspector accepts a UL or ETL mark as evidence of third-party testing.
Which Marks and Standards Apply to an Ella Tub
The table puts the organizations and standards side by side, with what each one means on an Ella walk-in tub according to Ella's published documents.
| Mark or standard | Who is behind it | What it means on an Ella tub | What it tells you |
|---|---|---|---|
| UL STD 1795 | UL, an independent laboratory on OSHA's Nationally Recognized Testing Laboratory list | The tub conforms to UL STD 1795 Hydro Massage Tub, and Ella tubs can be looked up on the UL website | The whole tub was designed and built to the hydromassage bathtub safety standard |
| ETL | Intertek, also on the OSHA list | Pumps, in-line heaters and other electrical components are ETL certified and clearly marked | The equipment that draws power carries a traceable third-party mark |
| CSA STD C22.2 No. 218.2 | CSA Group, which publishes the Canadian standards | The tub conforms to CSA STD C22.2 No. 218.2 | The tub was built to the Canadian standard for the tub as well |
| ASME A112.18.1 | A published standard for plumbing supply fittings | Called out on the spec sheet beside the picture of the handheld sprayer | It applies to supply fittings, not to the tub shell |
| ASME A112.19.15 | A published standard for bathtubs with doors made watertight by a pressure seal | Ella tubs are not certified to it, and Ella does not issue an ASME certificate for the tub itself | Tell your inspector early if this number is requested |
What the differences mean: the first three rows are the answer to the certification question. The tub as a whole conforms to the UL and CSA standards, and the powered components carry the ETL mark. The two ASME rows are there for clarity, because inspectors sometimes ask about them. One applies to supply fittings and appears on the spec sheet, and the other is a standard Ella has not pursued a listing for. Knowing which is which keeps a conversation with an inspector or electrician short and friendly.
How to Verify It Yourself
You do not have to take anyone's word for a certification. The label carrying the listing information, the model and the serial number sits inside the access panel on the front apron, on the seat side next to the door. The team calls it the UL label, and the listing on it can be looked up in the laboratory's public directory. The ETL mark appears on the components themselves.
Three words appear in Ella's documents, and each has a specific meaning:
- Listed means a laboratory evaluated the product against a named standard and authorized its mark, and the product can be looked up in the laboratory's public directory.
- Certified is the same idea as used by Intertek and CSA Group. A certified component carries the mark and can be traced in the directory.
- Conforms to means the product was designed and built to meet a named standard. This is the wording Ella uses for the whole tub.
When an electrician asks whether a tub is ETL or CSA, the useful reply names the standard as well as the mark, and What Is the Difference Between ETL Listed and CSA Certified? explains why the two describe the same kind of assurance from two different laboratories.
What the Certifications Do Not Cover
A safety mark is about safety evaluation against a standard. It is not a statement about comfort, fit, or where every part was made, and Ella is open about each of those points.
- ASME A112.19.15. Ella tubs are assembled and tested in Chicago and carry a safety listing on their electrical equipment, but the shell and door are not submitted for ASME listing. If your inspector requires an ASME-certified faucet, the Huntington Brass faucet option is the one to specify, and My Inspector Wants ASME A112.19.15 Certification for the Tub or Faucet: What Ella Can and Cannot Provide lists the documents the team can send.
- Country of manufacture. Ella describes its tubs as assembled and tested in the USA, not 100 percent made in the USA. The acrylic shell is produced at partner factories overseas, while the therapy system, pump, heater, controls, faucet and drains are installed in Chicago, Illinois, and every tub is filled and run before it ships. Are the pumps, heaters and faucets on Ella tubs made in the USA? goes through it component by component.
- Rankings between brands. The certification confirms a standard was met. It does not rank one brand above another.
Comparing Ella with the Brands Advertised on TV
Ella's published documents do not rate other brands, and this knowledge base does not either. We are proud of our tubs, and we also believe you should choose the tub that feels best for you and your home. With any company you talk to, five questions are worth asking, and the answers will tell you a great deal:
- Can you have the tub itemized in writing separately from the installation?
- Can you use your own trusted licensed plumber or contractor?
- Where is the tub assembled, jetted and tested?
- Does it have two drains so it empties quickly?
- Can you order a stainless steel door?
Here is what Ella's own documents say on the points they cover. Every tub is assembled, jetted and rigorously tested in the Chicago facility. Any licensed local plumber and electrician can install the tub using the owner's manual, with free technical support by phone and email, and Ella does not send technicians or perform installations. The published warranty is a lifetime limited warranty on parts, covering the shell, frame, door, door seal and finish along with the motors, pumps, fixtures, electronic controls and faucet, for the first purchaser at the original installation address. The thermostatic control valve carries a 1-year limited warranty, and labor is not covered. For how an order comes together through your Ella dealer or the team, see Where can I buy an Ella walk-in tub near me?.
We are happy to be compared. If you would like the spec sheet or listing details for a specific model to set beside another brand's paperwork, reach the team at ellasbubbles.com/support or (800) 480-6850.
Related Guides
- Electrical requirements by model: dedicated GFCI circuits for your walk-in tub
- What Is the Lifetime Limited Warranty on an Ella Walk-In Tub?
Related Videos
