Yes, a hand shower hose that was replaced once can be replaced again through the same technical support request, so a second failure is not a dead end. Coverage is decided from your photos each time, exactly as it was for the first hose, and Defect or Wear and Tear? Examples of How Support Evaluates Common Part Requests shows how the team looks at a damaged hose. The one thing to add on a second request is a clear note that this is the second hose, so the team has the full history in front of them.
How a Second Hose Request Is Decided
The Ella's Bubbles Lifetime Limited Warranty covers defects in workmanship and material under normal use and conditions. It does not cover ordinary wear, misuse, improper maintenance or damage from improper installation. Those terms are the same on the first request and on the second one. A replacement that has already been sent does not use up your coverage, and it does not guarantee the next decision either. Each request is reviewed on what the photos show.
A sprayer hose that has split or failed is a good example of a part the team has replaced under warranty after review. In that example the request was simple: a picture of the hose showing the damage, and a shipping address. Hoses are tested before they are packed, which is one reason the team wants to see exactly where a replacement hose failed if it does fail. The line between a defect and wear is not always obvious from a description alone, and the published warranty asks for photos of the affected part and a description of the problem before any decision is made. The photo is what turns a description into a decision.
What to Send with the Second Request
Open a ticket at ellasbubbles.com/support or call (800) 480-6850 and include the following, even if you sent the same details the first time:
- A clear picture showing exactly where the hose failed. Mark the spot that is split, cracked or bent so it cannot be missed.
- A picture of the whole hose in place, one of the fitting or thread where it connects, and a wider shot of the faucet it belongs to, so the faucet set is clear.
- Your model and serial number. The serial label is behind the magnetic access panel next to the door.
- Your installation address, and the address where the part should ship.
- A sentence saying that this is the second hose and that the first one was already replaced.
Photos do more than prove the failure. Hoses and sprayer heads vary by faucet set and by the age of the tub, and the team does not want to send the wrong one, so the pictures are also how the right hose is matched to your tub. Do I need to send photos to order a replacement walk-in tub part? explains each job the photo does. One welcome result is that the failed hose does not have to be shipped back. The photo stands in for it.
Why the History Matters on a Second Failure
When the team knows that a replacement has also failed, they can look at both cases together instead of treating the new ticket as a first request. That is why the note about the second hose belongs at the top of your message. It also helps to describe where the first hose failed and where the second one failed. Two failures in the same place tell the team something different from two failures in different places, and the pictures let them see it for themselves.
It is also worth telling the team how the replacement hose was fitted. The support article on defects and wear points hand shower owners to two things on this part of the tub: the orientation of the hose and the blue check valve. If you or your plumber have any doubt about either one, say so on the ticket and include a photo of the connection under the deck. If you also need an accessory that was not part of your original order, such as a wall-mount bracket for the hand shower, mention it on the same ticket and the team will explain how it is supplied.
What the Warranty Covers and Who Does the Work
The lifetime limited warranty covers parts for the original purchaser at the original installation address. That is why the team asks whether you are the original owner and whether the tub is newly purchased or already installed. Once the defect is verified from your photos, a covered part ships to you under the warranty.
Labor is never covered. Ella does not send technicians, so a local licensed plumber fits the new hose, and the same was true of the first replacement. The process is the same one used for other parts on the tub. A replacement heated seat or back pad, for example, is requested with the model and serial number, confirmed by the team, shipped by parcel carrier with a tracking number, and fitted locally.
Ordinary wear and tear is the main reason a part is not covered. Misuse, improper maintenance and damage from improper installation are also outside the warranty. None of this is a ruling on your hose. Every request is decided by the team after reviewing your photos, and the fastest way to an answer is a sharp picture of the failure.
If Water Is Spraying When the Hose Fails
A failed part that is spraying water should be dealt with before you take pictures. The guidance in Faucet Cartridge Burst and Spraying Water applies to any spraying faucet part: close the shut-off valves on the hot and cold lines feeding the tub if your installer fitted them, and if there are no stops at the tub, shut off the home's main water valve until the plumber arrives. If water reached the pump or controls, switch off the tub's breaker and let the area dry before the tub is used again. Then photograph the failed hose and open your ticket.
Related Guides
- How Do I Replace a Cracked, Leaking Hand Shower Hose?
- Missing or Worn Faucet Hose Washer? How to Get a Matching Replacement
- Hand Shower Hose Leaks or Will Not Attach at the Faucet: Replacing the Brass Connector Rod