Support Center / Showers, Panels & Accessories / Which Shower Drain Fits the Opening on Ella Shower Bases?
Back to Showers, Panels & Accessories

Which Shower Drain Fits the Opening on Ella Shower Bases?

Ella shower bases are built around a standard 2 inch drain opening, so a base like the ASBM3660L takes a 2 inch shower drain. The roll-in barrier-free bases already come with the drain and the collapsible rubber dam, so no separate drain is needed for those. Size is only half of the fit, because the opening is molded in one place, as Can I Choose a Left, Right, or Center Drain on an Ella Shower? explains.

The Opening Is a Standard 2 Inch

An Ella acrylic shower base comes out of a mold as a single finished piece that already carries the slope toward the drain, the drain opening and the threshold along the entry edge. That opening is a standard 2 inch drain opening. Ella's custom acrylic shower pans use the same 2 inch opening, which is the standard drain size on Ella's other shower bases.

For you, that means the drain fitting is not a special Ella part with an unusual size. A 2 inch shower drain is what the opening is made for. What does vary from base to base is whether drain hardware is already in the box and where in the floor the opening sits, so those are the two things to confirm before anyone buys a drain.

Drain Details by Base Type

The table gathers what the sources for this page publish. Where a source does not give a figure or a detail, the cell says not listed, and the spec sheet for your exact base is the place to confirm it.

BaseDrain openingDrain hardware suppliedDrain position
Standard acrylic base, such as the ASBM3660L2 inchnot listed, check the spec sheetMolded in and fixed for each model
Custom acrylic shower pan2 inchnot listed, check the spec sheetLeft, right, center or custom, at least 9 inches from the back and side walls
Roll-in barrier-free base2 inchDrain and collapsible rubber dam includedLeft or right on the 30, 32 and 36 by 60 sizes; center on the 48 by 60 and 50 by 50
Cultured marble basenot listednot listednot listed

What the differences mean for you: if your base is a roll-in barrier-free model, the drain question is already answered, because the drain and the collapsible rubber dam come with it. If it is a standard acrylic base such as the ASBM3660L, or a custom pan, plan on a 2 inch shower drain and check the spec sheet to see which drain hardware comes with the base before you buy anything. For a cultured marble base, the sources for this page do not state the drain details, so ask your Ella dealer or the team at (800) 480-6850 for that base's spec sheet.

Position Matters as Much as Size

A drain that is the right size still has to meet the pipe in your floor. On an Ella base the drain opening is part of the molded floor, so its position is set when the base is made and cannot be moved afterward. That includes the 32 by 60 roll-in. Before the order is placed, check the location the same way you check the size:

  1. Measure the center of your existing drain from the back wall and from each side wall.
  2. Compare those measurements with the drain location on the specification drawing for the base you are considering. Your Ella dealer or the team at (800) 480-6850 can supply the drawing.
  3. If the locations match, or your plumber confirms the trap can be moved within the space available, the base will work.
  4. If they do not match and the plumbing cannot be moved, look at a different size whose drain location fits, or ask about a custom base.

A drain that does not line up is usually discovered only when the base is set on the floor, which is the hardest point to change course. The full room and drain check is laid out step by step in Will an Ella shower base fit my space and existing drain location?, and the measuring method is in How Do I Measure My Bathroom for a Shower Pan or Shower Base?.

When a Custom Pan Is the Answer

If none of the standard drain positions meets your pipe, a custom rectangle can place the drain where your line already comes up, as long as it sits at least 9 inches from the back and side walls. The opening is still the same 2 inch size. Custom drain measurements can be rounded up to the nearest inch when they are entered, so confirm your exact drain location with the team at (800) 480-6850 before your base is built. The base families and their options are summarized in Shower Bases and Walls: Roll-In, Seat, Custom Sizes, Thresholds and Wall Systems.

What to Confirm Before You Buy a Drain

  • The exact model of your base, so you are reading the right spec sheet.
  • The drain location shown on that spec sheet, checked against the center of your existing drain.
  • Which drain hardware comes with the base, so you do not buy a part that is already in the box.
  • Whether your plumber is comfortable with the trap location as it is, or plans to relocate the rough-in.

Ella does not send technicians, so the drain connection is made by your local licensed plumber. A licensed plumber can also tell you whether your floor construction allows the trap to be relocated to match the base.

Video
Video
Video

Common Questions

What size drain opening does an Ella shower base have?
Ella shower bases are built around a standard 2 inch drain opening. A base like the ASBM3660L takes a 2 inch shower drain, and Ella's custom acrylic shower pans use the same opening.
Do the roll-in shower bases come with a drain?
Yes. The roll-in barrier-free bases already come with the drain and the collapsible rubber dam. You do not need to buy a separate drain for those bases.
Can the drain be moved on a standard Ella base?
No. The drain opening is molded into the base at the factory and is fixed for each model. If it does not line up with your floor drain, the choices are a different base whose drain location matches, a custom-size base, or having your plumber relocate the rough-in.
How close to a wall can a custom base drain sit?
On a custom rectangle the drain can be placed on the left, on the right, in the center or at a custom location. It must sit at least 9 inches from the back and side walls.
Who connects the shower drain to the house plumbing?
Your local licensed plumber makes the drain connection. Ella does not send technicians. Your Ella dealer or the team at (800) 480-6850 can supply the specification drawing your plumber needs.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket