Support Center / Sizes, Fit & Measuring / What Is the Smallest Shower Pan Size That Ella's Bubbles Makes?
Back to Sizes, Fit & Measuring

What Is the Smallest Shower Pan Size That Ella's Bubbles Makes?

The smallest shower pan Ella's Bubbles makes is a custom acrylic base measuring 30 by 30 inches, and that minimum applies to both three-wall alcove bases and corner bases. The smallest stock pan is the 30 by 60 inch standard base, so any square or short footprint is a custom request. The whole range is laid out in What sizes do shower pans come in, from smallest to largest?, and this page stays at the small end: what the minimum really is, what limits it, and how to tell whether your space can take it.

Two Answers: The Smallest Custom Pan and the Smallest Stock Pan

People who ask about the smallest shower pan usually mean one of two things. Some have a compact space and want to know how small a base can go. Others have a regular tub alcove and want the narrowest pan that is available as a standard size. The two answers are different, and it helps to know both before you measure.

  • Smallest pan of any kind: 30 by 30 inches, built as a custom base. The custom shower base page lists this as the minimum, and it is the same whether the base sits between three walls or in a two-wall corner.
  • Smallest standard pan: 30 by 60 inches. Ella manufactures its own acrylic shower bases in three standard sizes, 30 by 60, 32 by 60 and 36 by 60 inches, each with a left or right drain. All three share the 60 inch length and differ only in width, so 30 inches is the narrowest stock width and there is no shorter stock length.

There is no stock pan smaller than the 30 by 60 inch standard. If your space is shorter than 60 inches, the pan is made to your length and width. That is routine work. Sizes such as 46 by 46, 50 by 30 and 36 by 44 inches have all been handled as custom builds, and a 58 by 30 inch base with a center drain has been produced. The three stock footprints, and the threshold styles offered within them, are described in What standard sizes do shower pans come in?.

Small Shower Pan Sizes Side by Side

OptionSizeDrainBest for
Custom three-wall alcove base, minimum30 by 30 inchesLeft, right or center, at least 9 inches from each wallThe smallest alcove an Ella base can fill
Custom corner base, minimum30 by 30 inchesLeft, right or center, at least 9 inches from each wallA compact two-wall corner
Custom base, short example58 by 30 inchesCenter, as producedAn alcove just under the 60 inch standard length
Standard base, smallest30 inches wide by 60 inches longLeft or right, set positionThe narrowest 60 inch alcove
Standard base, middle32 inches wide by 60 inches longLeft or right, set positionA slightly wider 60 inch alcove
Standard base, widest36 inches wide by 60 inches longLeft or right, set positionThe widest standard alcove

Here is what those differences mean for your bathroom. If your opening is a full 60 inches long, a standard pan is the simplest choice, because the drain sits in a set position for each size and you only confirm the drain side so it lines up with the drain line already in your floor. If your opening is shorter than 60 inches, or closer to square, you are in custom territory, and the smallest footprint the team can build is 30 by 30 inches. The minimum is the same for an alcove and for a corner, but the two are not the same request. The team places the drain and the finished edges differently for each layout, so say which one you have. At the other end, custom alcove bases run up to 44 inches wide by 80 inches long, and corner bases run up to 42 by 60 inches.

What the Drain Rule Means on a Small Pan

On a custom base the drain can be placed on the left, on the right or in the center, but it must sit at least 9 inches from each wall. A drain only 7 inches from the threshold edge is not possible, even on a custom pan. On a large base that rule leaves plenty of room to work with. On the smallest pans it matters much more, because the walls are closer together and the part of the floor where the drain is allowed to sit shrinks with them.

That makes the drain the first thing to check when you are planning a very small shower. Find the existing drain line in the floor and measure from its center to each wall. If that point is closer than 9 inches to any wall, raise it with your Ella dealer or the team at (800) 480-6850 before your order is placed. The length, the width and the drain position are all fixed when the pan is made, so this is a detail to settle on paper and not on installation day.

Shape, Threshold and Finish at the Small End

A few rules apply to every custom base, and they are worth knowing when the space is tight.

  • Rectangles only. Bases with angled or curved edges are not offered. A square 30 by 30 inch pan is fine, but a space that needs a non-rectangular pan is not a fit for an Ella base.
  • Threshold on the longer side. On a custom three-wall alcove base, the threshold goes on the longer side. Note which side is the entry when you measure.
  • Threshold height. A custom base typically has a threshold of about 3 inches. Tell the team if you have a different entry in mind so they can confirm what can be made.
  • Finished acrylic. An Ella shower pan, standard or custom, is finished acrylic that is ready to use once installed. It does not need to be tiled over. Your contractor sets the base, connects the drain and finishes the walls around it.
  • Made to size, not cut to size. The pan is built to your dimensions at the factory, so a small space is solved with a custom order and not with a saw. The reasons are explained in Can shower pans be cut to size or ordered custom?.

How to Measure a Small Space Before You Ask

Measure the finished opening, not the framing, and write down five things. The full method, including the corner base rules, is in How Do You Measure a Shower Base, Including a Corner Base?.

  1. Width. Measure across the opening the base will fill.
  2. Length. Measure along the back wall.
  3. Drain position. Measure from the center of the existing drain to each wall, and check it against the 9 inch rule.
  4. Layout. Note whether the base is enclosed by three walls or sits in a corner against two walls.
  5. Entry. Note which side is the entry and the kind of entry edge you would like.

If both the width and the length come out at 30 inches or more, and the space is a rectangle, share the figures with your Ella dealer or the team at (800) 480-6850 and they will confirm what can be made for your space.

Confirm the Size Before the Old Tub Comes Out

The low-threshold shower installation video gives advice that suits any compact shower project. It shows a three-piece low-threshold shower being dry assembled in a clean, open space before it is carried into the bathroom, so the installer can confirm the correct panels and the correct drain location were received and that everything is free from damage. It also recommends delaying demolition of the existing bathtub area until you are confident the new unit is the correct size and condition, so nobody is left without a working bathroom. The installer then checks the framing pocket against the framing diagrams and checks it for square, plumb and level. The kit in the video uses its own pan and is not a 30 by 30 inch custom base, but the habit carries over. With a small pan there is very little room to adjust, so check the size and the drain location first.

Video

Watch: Step-by-Step Low-Threshold Shower Installation for Remodeling | Ella’s Bubbles with chapters and a full transcript.

Common Questions

What is the smallest shower pan Ella's Bubbles can make?
The smallest is a custom acrylic base measuring 30 by 30 inches. That minimum applies to both three-wall alcove bases and corner bases. Anything at that size is a custom request, because there is no stock pan that small.
What is the smallest standard shower pan size?
The smallest standard pan is 30 inches wide by 60 inches long, with a left or right drain. The other two standard sizes are 32 by 60 and 36 by 60 inches. All three share the 60 inch length and differ only in width.
Can I get a shower pan shorter than 60 inches?
Yes, as a custom base. Pans shorter than 60 inches are routine, and a 58 by 30 inch base with a center drain has been produced. Sizes such as 46 by 46, 50 by 30 and 36 by 44 inches have also been handled as custom builds.
Where can the drain go on a small custom pan?
The drain can be placed left, right or center, but it must sit at least 9 inches from each wall. A drain only 7 inches from the threshold edge is not possible, even on a custom pan. Measure from the center of your existing drain to each wall before you ask for a base.
Can a small shower pan have an angled or curved front?
No. Only rectangular bases are made, and bases with angled or curved edges are not offered. A square pan such as 30 by 30 inches is within the range, but a space that needs a non-rectangular pan is not a fit for an Ella base.
Is the smallest corner shower pan the same size as the smallest alcove pan?
Yes, both start at 30 by 30 inches. They differ at the large end, where corner bases go up to 42 by 60 inches and alcove bases go up to 44 inches wide by 80 inches long. Tell your Ella dealer or the team at (800) 480-6850 which layout you have, because the drain and the finished edges are placed differently for each.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket