A roll-in shower is built on a curb-less base, so a wheelchair or shower chair rolls straight in with no lip to step or roll over. A walk-in shower, as the term is used on this page, is a shower you step into over a low raised threshold, which in the Ella lineup means a 3 inch step-in base or a shower stall with a 4 inch threshold. The entry is the real difference between the two, and What is a roll-in shower and who should get one? covers the roll-in side in more depth.
What Makes a Shower a Roll-In Shower
The base decides it. All of Ella's standard roll-in bases are ADA curb-less pans, so there is no threshold to step or roll over. Instead of a curb, the front edge has a gentle bevel. AcrylX barrier-free bases have a beveled roll-in entry of 3/4 inch to 1 1/8 inch depending on size, and SMC bases are 1 inch or 1 1/8 inch. That is the lowest entry Ella makes, and it is what lets wheels pass without a bump that has to be lifted over.
- Three standard sizes. The standard roll-in bases are 30 by 60 inches, 32 by 60 inches and 36 by 60 inches. All three share a 60 inch length and differ only in width.
- Drain position chosen at order. The drain position is specified when you order, and the 32 by 60 inch barrier-free base is offered in left and right configurations and is ready to ship.
- A finished surface. The pans are finished acrylic with the slope and drain molded in, so they need no tile and must not be tiled over.
- A collapsible shower dam. Roll-in and barrier-free bases ship with a self-adhesive collapsible rubber dam that keeps water in the stall.
The full list of roll-in sizes, and which pieces are ordered separately, is in Wheelchair Accessible Shower Base Sizes, Drain Positions, and What Is Sold Separately.
What a Walk-In Shower with a Threshold Looks Like
A step-in shower keeps a raised edge at the front. For anyone who prefers a slightly raised entry instead of a barrier-free design, Ella offers a 3 inch step-in threshold base. One-piece and three-piece shower stalls have a 4 inch threshold. A custom base typically has a threshold of about 3 inches, and custom bases can also be made with a 2 inch or 4 inch front threshold. That choice changes how deep the basin is inside the shower: a 4 inch threshold gives an inside basin depth of approximately 2 inches, and a 2 inch threshold gives an inside basin depth of approximately 0.25 inch.
Ella groups its bases into two styles, wheelchair roll-in shower bases and seat shower bases, and there are also zero threshold bases that sit flush with the surrounding floor for a barrier-free entry. Shower Bases and Walls: Roll-In, Seat, Custom Sizes, Thresholds and Wall Systems pulls the threshold and drain choices together in one place.
Roll-In and Step-In Entries Side by Side
| Shower option | Entry height | What the entry is like | Best for |
|---|---|---|---|
| AcrylX barrier-free roll-in base | 3/4 inch to 1 1/8 inch, depending on size | Beveled roll-in entry, curb-less pan | A bather who stays seated in a wheelchair or shower chair |
| SMC roll-in base | 1 inch or 1 1/8 inch | Beveled roll-in entry | A roll-in shower in SMC |
| Zero threshold base | not listed | Sits flush with the surrounding floor | A barrier-free entry level with the bathroom floor |
| Step-in threshold base | 3 inches | A slightly raised edge to step over | A bather who walks in and prefers a raised edge |
| One-piece or three-piece shower stall | 4 inches | A raised threshold to step over | A complete stall for a bather who steps in |
| Custom base, 2 inch front threshold | 2 inches | Inside basin depth of approximately 0.25 inch | A custom footprint with a lower step |
| Custom base, 4 inch front threshold | 4 inches | Inside basin depth of approximately 2 inches | A custom footprint with a deeper basin |
What the differences mean is simple. If anything with wheels has to enter the shower, only the roll-in and zero threshold entries work, because every other option asks the bather to lift a foot over 2 to 4 inches of raised edge. If the bather walks in comfortably, a raised threshold is a perfectly good choice, and it brings a basin that holds water behind the edge. The roll-in base gives up that raised edge on purpose, which is why it ships with the shower dam described below.
How Each Shower Keeps the Water in
A step-in shower holds water the traditional way: the raised threshold is the barrier, and the basin behind it is as deep as the threshold allows. A roll-in shower has no raised edge, so it uses the Ella flexible shower dam instead. The dam is a flexible, compressible, waterproof strip made for exclusive use with a barrier-free wheelchair accessible shower base.
The video on this page shows how it works and how it goes in. The installer measures precisely, cleans the surfaces with denatured alcohol, lays a tape line as a guide, cuts the dam to length and fits the end caps. The backing tape is peeled back a little at a time while the dam is pressed snugly against the shower wall and floor, and a thin bead of silicone is then smoothed along the lower edge on both sides and around both end caps. The video ends with the result: wheels simply roll over the compressible material while entering or exiting, and the dam returns to its original shape so the water stays in the shower stall.
Seating, Caregiver Options and Walls
A roll-in shower does not have to be a shower without a seat. A seat is optional: there are folding benches and seats rated from 300 to 600 pounds, and a 36 by 60 base with a molded seat. For a bather who is helped by a caregiver, options include a weighted anti-bacterial nylon curtain, a stainless curtain rod and a slide bar with hand shower.
The walls are the same choice either way. Ella offers three-piece acrylic wall systems in white, CNC and digital print finishes, with ADA accessories available, and large acrylic wall panels including 98 by 60 inch back walls. Shower products are sold per item rather than as a single bundle, so a complete shower is put together from the base, a wall system sized to the base, and accessories such as grab bars or a shower door. Shower Bases, Walls, and Filler Pieces covers the wall sizes and the 8 inch wide L-shaped filler piece that closes a gap between a base and an adjoining wall.
How to Decide and What to Have Ready
- Decide how the bather enters. If the bather stays in a wheelchair or shower chair, choose a roll-in base. If the bather walks in and likes a raised edge, a step-in threshold fits.
- Measure your space. A standard base is the simplest choice when one fits. When none does, a rectangular base can be made to order up to 44 inches wide by 80 inches long, as What Sizes Do Ella Shower Bases and Shower Pans Come In? explains.
- Note where the existing drain line sits in the floor. On a custom base the drain can be placed left, right or center, but it must sit at least 9 inches from each wall.
- Choose acrylic wall panels, or plan for tile on the walls if you have a custom base with the tile flange.
- Share your choices with your Ella dealer or the team at (800) 480-6850, or open a ticket at ellasbubbles.com/support.

Watch: The Ella Shower Dam, Keep Water In, Roll In With Ease | Ella's Bubbles with chapters and a full transcript.
Related Guides
- What does barrier-free mean, and which shower bases have no threshold?
- What is a roll-in shower and who is it designed for?
- What Is a Roll-In Shower and How Does It Differ From a Transfer Shower?
Related Videos
