Support Center / Showers, Panels & Accessories / What is a shower stall, and how is an Ella stall built?
Back to Showers, Panels & Accessories

What is a shower stall, and how is an Ella stall built?

A shower stall is a complete, self-contained shower unit: a base you stand on and the walls around it, made either as a single molded piece or as sections that are assembled in the bathroom. Ella's Bubbles builds its stalls in one-piece, three-piece and five-piece versions, and each ships with its grab bars and drain while the valve, shower head and hand shower are chosen separately, as listed in What Comes in the Box With an Ella Shower Kit, and What You Still Need to Buy. This page explains what the stall is, how the three constructions differ, and what that means for your bathroom.

One-Piece, Three-Piece and Five-Piece Construction

The number in the name tells you how the stall is put together and how it travels to the bathroom. A one-piece stall arrives as a single molded piece that cannot be broken down. A three-piece stall ships as separate sections. A five-piece stall is a base plus four wall sections that assemble on site. Whichever you choose, the result is the same kind of product: a finished stall with a low step-in and grab bars, ready for your plumber to connect.

ConstructionHow it arrivesClearance needed on the way inSeatingBest for
One-piece stallA single molded pieceAt least 33 inches at every doorway and hallwaySeat side is confirmed with your orderNew construction, where the stall is set before framing and doors are finished
Three-piece stallSeparate sectionsnot listedA molded seat is part of the 60 x 33 low-threshold three-piece showerHomes already built, where the openings are narrower than 33 inches
Five-piece stallA base plus four wall sections that assemble on sitenot listedNo molded seat, a bench is the seating optionOrders that call for soap ledges, a bench, and 24-inch or 36-inch grab bars

What the differences mean: the fewer the pieces, the more the route into the bathroom decides whether the stall can be used at all. A one-piece unit does not fit through an average finished doorway or hallway, so it suits a home that is still being framed. The multi-piece stalls trade that single molded shell for sections that are carried in and joined in the room, which is why they are the ones to compare for a finished home. Seating also differs by family, so decide whether you want a molded seat or a bench before you settle on a construction.

What Is Built into the Stall, and What Is Added on Site

Much of what makes a stall convenient is formed into it at the factory, and some parts are deliberately left for your installer.

  • Reinforced backing for grab bars. The wall panels have reinforced backing built in. The grab bars ship loose with the unit, and your installer fastens them into that backing with the correct screws so they are secure.
  • A solid wall with no valve cutout. The wall arrives with no opening for a valve or shower head and no preset height or offset. The right location depends on the valve you choose, the rough-in behind the wall and the person using the shower, so your plumber marks and cuts the openings during installation.
  • The drain. The drain ships with the stall. Your plumber connects it to the house waste line and supplies the rough-in piping and fittings.
  • Soap ledges. On the five-piece stall, soap ledges are shelves formed in the wall panels. They are an ordering option built into the panels, not an add-on for a stall already in place.
  • The foot ledge. The five-piece stall has a foot ledge molded into its base. It measures 17 5/8 inches long, the unit is not available without it, and any low grab bar or bench should be planned around it.

The five-piece options, including the bench and the two grab bar lengths, are covered in Ordering the 5-Piece Shower Stall With Soap Ledges, a Bench, or Grab Bars. One more point to settle early is the door. Ella does not carry a matching door for every stall size, so ask which door, if any, fits the opening of the size you are ordering before you plan the enclosure.

What the Construction Means for Getting It into Your Home

Because a one-piece stall cannot be taken apart, the team contacts you before the order goes to production to confirm three things: that you understand it is one piece and needs the clearance, the seat side and drain side you selected, and the number of grab bars. To check your own home, measure the narrowest point of every exterior door, interior door, hallway and stairway between the delivery point and the bathroom, and confirm each one is 33 inches or more. If the bathroom is not yet framed, plan the sequence with your contractor so the shower goes in before the doorways are finished. The full method is in Will a One-Piece Ella Shower Fit Through My Doorways? The 33-Inch Clearance Rule and New Construction.

For every construction, state the drain position you need, left-hand or right-hand, so the base matches the rough plumbing in your floor. The freight carrier calls to schedule a delivery appointment, so someone needs to be there to receive the stall. Inspect it on arrival, keep all packaging material, and report any shipping damage right away to where you purchased.

Accessible by Design, but Not an ADA Certified Unit

Ella stalls are built as accessible residential showers, with a low step-in, factory grab bars and a seat on some configurations. They are not ADA compliant, and that answer applies to the stall as a complete unit. A shower is only ADA compliant when the full configuration, including the compartment dimensions, threshold height, seat, grab bar placement and control reach, satisfies every applicable requirement. For a private home that certification is generally not a building code requirement. For a commercial building or any project that will be inspected against the standard, confirm the requirement with your local code official before you order, as explained in Are Ella Shower Stalls ADA Compliant? What the Answer Means for Home and Commercial Projects.

Caring for the Walls and the Floor

A stall has two surfaces that clean differently. The walls clean well with Soft Scrub on a cloth, while the floor calls for Soft Scrub worked in with a brush, because a cloth alone does not lift the buildup that settles there. For hard water staining, the team recommends Goo Gone or rubbing alcohol. Other cleaners are acceptable as long as they contain no ammonia, bleach or Clorox, because those products make the gloss dull. The step by step routine is in The Shower Floor Looks Dull or Dirty Compared to the Walls: How to Clean It.

Video
Video

Common Questions

What parts make up an Ella shower stall?
A stall is the base and the walls around it, built as one molded piece or as sections. The five-piece version, for example, is a base plus four wall sections that assemble on site. Each stall ships with its listed grab bars and the drain.
Does a shower stall come with a shower head and valve?
No. The stall does not include a shower head, a hand shower, a mixing valve or valve trim. Your plumber selects the valve and cuts the wall openings on site, so have those fixtures on hand before installation day.
Which shower stall is best for a house that is already built?
A one-piece stall needs at least 33 inches of clear opening at every doorway and hallway and is intended mostly for new construction. If your openings are narrower, compare the three-piece stall, which ships as separate sections. Your Ella dealer or the team at (800) 480-6850 can help you match a stall to your measurements.
Are the grab bars already installed in the stall?
No, the grab bars ship loose with the unit. Your installer fastens them into the reinforced backing built into the wall panels with the correct screws. Check the grab bar count against your order when you unpack.
Can I get a built-in seat in a shower stall?
It depends on the stall family. A molded seat is not offered on the five-piece stall, where a bench ordered with the unit provides the seating. Other stall families include a molded seat, so mention seating when you order.
Is an Ella shower stall ADA compliant for commercial use?
No. Ella stalls are accessible residential showers and are not certified to the ADA standard for accessible shower compartments. For a project that will be inspected against that standard, confirm the requirement with your local code official before ordering.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket