If water gushes from the bottom of your Ella Lounger door while the tub is filling, for example when it is about half full, stop filling the tub right away so water does not reach your floor. Then take a few close-up photos of the door and its seal and contact the Ella's Bubbles support team at ellasbubbles.com/support or (800) 480-6850. Good photos and your serial number help the team understand what is happening and guide you to the right next step.
First, Protect Your Floor
Stop filling as soon as you notice water coming from the bottom of the door so the water stays in the tub and off the bathroom floor. Our guide on what to check first when water appears at the door has more helpful tips.
Photos That Help the Support Team
Clear pictures let the team see the seal the way you see it. Please send:
- A close-up of the bottom edge of the door with the door closed.
- A close-up of the seal where it meets the frame with the door closed.
- The same bottom edge and seal area with the door open.
- Close-ups of any chips, tears, or flattened spots you notice along the seal.
A short description of what you are seeing is helpful too.
Find Your Serial Number
Your tub's serial number is printed on a label that usually begins with the letter M. The label is behind the magnetic access panel next to the door, on the inside of that removable panel. Including the serial number with your photos helps the team identify your exact tub. If you have trouble locating it, the team at (800) 480-6850 is happy to help.
What Happens Next
Once the team has your photos, description, and serial number, they will review the door and seal. When a covered defect is verified, the necessary part ships to the original customer's address, and a local licensed plumber handles the fitting. Lifetime technical support comes with every tub, and the support team can assist you and your plumber by phone, email, or live video.
To learn more about the seal and how it is looked after, see how to clean, reseat, and replace your walk-in tub door seal and what to do when a door seal or gasket looks worn, loose, or leaks.