Support Center / Showers, Panels & Accessories / What Is a Shower Unit and What Does It Usually Include?
Back to Showers, Panels & Accessories

What Is a Shower Unit and What Does It Usually Include?

A shower unit is a factory-made shower stall, meaning a base and its wall sections built to fit together, that your installer sets into the alcove as a finished enclosure. In the Ella's Bubbles line a shower unit comes in three constructions: a one-piece molded unit, a three-piece low-threshold shower and a 5-piece stall. What it includes beyond the base and walls depends on the options you specify when you order, which is laid out for one family in Ordering the 5-Piece Shower Stall With Soap Ledges, a Bench, or Grab Bars.

The Three Ways a Shower Unit Is Built

The word unit covers more than one kind of product, and the construction is the first thing to pin down, because it decides how the shower travels through your home and how it goes together in the alcove.

  • One-piece. A single molded unit. It cannot be broken down, so it has to pass through every opening on the way to the bathroom in one piece.
  • Three-piece. A low-threshold shower made of three sections. It ships fully preassembled, with the sections bolted together at the factory, so it arrives looking like a single molded unit until the shipping bolts come out.
  • 5-piece. A base plus four wall sections that assemble on site.
Shower unitHow it is builtGetting it to the bathroomSeatingBest for
One-pieceA single molded unit that cannot be broken downAt least 33 inches of clear opening at every doorway, hallway and stairway on the routeSeat side is confirmed with your orderNew construction, where the shower is set before doorways and hallways are finished
Three-piece low-thresholdThree sections, bolted together for shippingSeparate sections pass through ordinary doorways; clearance figure not listedMolded seatFinished homes with ordinary doorways
5-piece stallA base plus four wall sectionsAssembles on site; clearance figure not listedOptional bench; no molded seatBuyers who want soap ledges, a bench and grab bars specified with the stall

What the differences mean for you is mostly about the path into the room. A one-piece unit gives you a single molded enclosure, but one tight doorway is enough to stop it, and most finished homes have at least one opening narrower than 33 inches. The sectional units solve that by coming apart. Between those two, the choice turns on seating: the three-piece shower has a molded seat, while the 5-piece stall offers a bench instead.

What Comes with the Unit and What You Choose

The base and the walls are the unit itself. Around them, several items are either built in or chosen when the order is placed, and it helps to know which is which.

  • Foot ledge. On the 5-piece stall a foot ledge is part of the molded base, and the unit is not available without it. That ledge measures 17 5/8 inches long, so plan any low grab bar or bench placement around it.
  • Soap ledges. These are shelves formed in the wall panels for soap and bottles. They are an ordering option built into the panels, not an add-on for a stall that is already in place, so confirm the placement you want when you order.
  • Seating. The 5-piece stall can be ordered with a bench. On a one-piece unit, the seat side is one of the selections confirmed with you before the order goes to production.
  • Grab bars. On the 5-piece stall you choose a 24-inch or 36-inch bar and say how many you need. Grab bars ship with the unit and are not factory installed. Your installer anchors them during installation.
  • Drain position. You state a left-hand or right-hand drain so the base matches your rough plumbing.

Place these choices with your Ella dealer or the team at (800) 480-6850. On a one-piece shower, the team contacts you before production to confirm the seat side, the drain side and the number of grab bars, and to make sure you understand that the shower is one piece and needs the clearance.

What a Shower Unit Does Not Include

A few things people expect to find in the crate are separate, and knowing them early keeps the enclosure plan realistic.

  • A door for every size. Ella does not carry a matching door for every stall size. Ask which door, if any, fits the opening of the size you are ordering before you plan the enclosure.
  • A molded seat on the 5-piece stall. A seat formed as part of the base is not offered on that unit. The molded seat belongs to other stall families.
  • Shelves and niches. Corner shelves and acrylic soap niches are listed among the shower accessories and are sold separately. The sizes offered are the ones on the accessories list, so check that list before assuming a custom size can be made.
  • Installation. Ella's Bubbles does not perform installations. A licensed, experienced local contractor sets the unit, and the installation instructions for each shower are published on the Ella website.

One more point on wording. Some people say shower unit when they mean the shower fittings on a walk-in tub, such as the hand shower, a wall slide bar or a rain shower column. Those are tub accessories, not stalls. The column has an overhead rain shower head and mounts at the deck position where the hand shower normally sits, and Can I Add a Hand Shower Slide Bar or Rain Shower Column After My Tub Is Installed? explains when each can be fitted.

Getting the Unit into the Bathroom

For a one-piece shower, measure before you order. Start at the exterior door the unit will come through, then measure every interior door, hallway and stairway on the route at its narrowest point, using the finished opening and not the frame. Every opening needs at least 33 inches of clear space, and a wider stall needs correspondingly wider openings. The step-by-step walk of the route is in How Do I Measure Doorways and Hallways for a One-Piece Ella Shower?

If the bathroom is not yet framed, plan the sequence with your contractor so the shower is set in place before the doorways and hallways are finished. If an opening is too narrow and the home is already finished, the three-piece shower is the one to compare, because its sections pass through ordinary doorways.

What to Do When the Unit Arrives

A three-piece shower surprises many installers, because the order says three-piece and the unpacked shower shows no visible seams. Both are correct. The shipping bolts are on the back of the shower, the side that faces the wall after installation, and the number of bolts can vary, so check the whole back panel. Once all of them are out, the sections separate and the seams appear where they belong. The details are in Why the Three-Piece Shower Arrives as One Unit and Where the Shipping Bolts Are.

The installation video on this page shows the step that comes next for a modular low-threshold shower: dry assembling it in a clean, dry, open space before anything moves into the bathroom. The video gives four reasons for doing it.

  1. To confirm you received the correct panels.
  2. To confirm you received the correct drain location.
  3. To confirm the panels and pan are free from damage and defect.
  4. To confirm the panels align properly when assembled.

The same video recommends delaying demolition of the existing bathtub area until you are confident the new unit is the correct size and in good condition, so the household is not left without a working bathroom. It also covers the delivery itself: an adult should be present to receive and inspect the shipment, any visible damage should be noted on the bill of lading before the driver leaves, and if the unit cannot be inspected on the spot, the words subject to further inspection should go next to the signature. Freight-damage claims must be filed within 48 hours of receiving the shipment, so save all packaging and report any concern through ellasbubbles.com/support or (800) 480-6850.

Video

Watch: Barrier-Free 5-Piece Low-Threshold Shower Installation, Complete Tutorial | Ella’s Bubbles with chapters and a full transcript.

Common Questions

Is a shower unit the same thing as a shower stall?
In the Ella line the two terms describe the same product: a base and wall sections made to go together as one enclosure. The construction varies, since a unit can be one molded piece, three sections or a base with four wall sections.
Does a shower unit come with a shower door?
Not automatically. Ella does not carry a matching door for every stall size, so ask which door, if any, fits the opening of the size you are ordering. Settle that before you plan the enclosure.
Are grab bars installed on the shower unit at the factory?
No. Grab bars ship with the unit and are not factory installed. Your installer mounts and anchors them securely during installation, and on the 5-piece stall you choose a 24-inch or 36-inch bar when ordering.
Can I add soap ledges to a shower stall after it is installed?
Soap ledges are formed in the wall panels as built, so they are an ordering option and not an add-on for a stall already in place. Corner shelves and acrylic soap niches are separate accessories, offered in the sizes on the accessories list.
Why does my three-piece shower look like one solid piece?
It ships fully preassembled, with the sections held together by shipping bolts on the back. Bolting the sections together protects them in transit. Remove all packaging and all of the bolts, and the sections separate.
Will a one-piece shower unit fit through a standard doorway?
Only if every opening on the route offers at least 33 inches of clear opening. A one-piece unit cannot be broken down, and most finished homes have at least one opening narrower than that. This is why the one-piece stall is aimed at new construction.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket