An Ella walk-in tub has a heated seat and backrest when that option was chosen on its order. It is an option, not a standard part of every tub, and it is available on any standard order. Independent foot massage, the LED chromatherapy light and the massage systems work the same way: they are built in at the factory and selected at order time, and Walk-In Tub Therapy Options and Features lays out the full menu.
How the Heated Seat and Backrest Works
The heated seat and backrest is one of Ella's comfort options. It warms the two surfaces you rest against, and it runs from its own push button, separate from the massage controls. The short video on this page shows the option in use, and the routine is simple:
- Push the button once and the heated seat activates.
- Turn the heated seat on 10 to 15 minutes before you enter the tub for maximum comfort.
- The heated seat turns off automatically after 20 minutes.
- If you would like it back on, just push the button again.
The option also has its own electrical need. For the heated seat and backrest, the published schematic calls for a 15A 120V GFCI-protected line for the heater alone, and a local licensed electrician makes that connection. This matters most on a soaking tub. A plain soaker needs no outlet at all, because its drains are gravity driven, and the heated seat and backrest is the only electrical item a soaker can carry. If you want a quiet tub with no jets and a warm seat, that combination is described in Soaking-Only Walk-In Tubs: No Jets, No Pumps, No Electrical.
Which Options Exist, and How Each One Is Ordered
Ella walk-in tubs are available with five jetting and therapy options: soaker, hydro, air plus hydro, hydro plus microbubbles, and hydro plus independent foot massage. So yes, these are walk-in tubs with jets and massage, unless you choose the soaker. Around those packages sit the features people ask about most. The table shows what each one is and how it becomes part of a tub.
| Option | What it is | How it becomes part of your tub |
|---|---|---|
| Heated seat and backrest | A warming seat and backrest with its own button, which turns off automatically after 20 minutes | Chosen at order time on any standard order, including a soaker. Needs a 15A 120V GFCI-protected line for the heater alone |
| Independent foot massage | A separate therapy package with its own pump and its own control | Ordered as the hydro plus independent foot massage package |
| LED chromatherapy light | A light with its own button, fitted only when the light is built in | Comes with every dual and triple package, and is available as an extra on hydro-only tubs. Not part of a soaker |
| In-line heater | A heater that maintains water temperature during the bath and is not designed to raise it | Part of the hydro system. It cannot be added to a soaking or air only configuration |
| Ozone sterilization | A feature that belongs to the hydro system | Arrives with the hydro package. A soaker does not have it |
| Air massage | A three-speed blower with Auto Purge, which clears the air lines by itself | Seated walk-in tubs pair air with hydro. Air jets cannot be added to a hydro only tub |
| Microbubble therapy | Millions of tiny bubbles that give the water a milky, silky texture | Ordered as the hydro plus microbubbles package, factory installed |
The pattern in the table is the useful part. The heated seat is the one comfort feature that does not depend on a massage package, so it can ride on a soaker as easily as on a fully jetted tub. Everything else follows the package. The chromatherapy light follows the dual and triple packages, the in-line heater and ozone follow the hydro system, and the foot massage is a package of its own. Choosing the package therefore decides most of the extras, and the heated seat is a separate yes or no on top of it. If no massage at all is what you want, Can I Order an Ella Walk-In Tub With No Jets at All? covers what a soaker is built with.
Why the Options Are Chosen Before the Tub Is Built
Each therapy system is installed at the factory with its own dedicated pump, plumbing and switches built into the shell. That is why these systems are selected at order time and are not added after the tub is made. A few specific limits follow from that:
- Air jets cannot be added to a tub that was ordered as hydro only.
- Extra jets in a particular spot, such as the lumbar area, are not added to a tub that is already built.
- An in-line heater cannot be added to a soaking or air only tub, because there is no hydro loop for it to heat.
- A heated seat is chosen at order time, so a tub ordered without one was built without one.
- Clearance and fixed units, such as the Deluxe, are sold as configured and are never modified.
If your tub has not been built yet, this is the moment to speak up. Tell your Ella dealer or the team at (800) 480-6850 about any therapy or heated seat you want, so it is included in the order. The longer explanation of each limit is in Can I Add Air Jets, a Heater or a Heated Seat to My Tub Later?.
Limits That Depend on the Model
Not every package fits every tub. Some smaller tubs lack room under the shell for hydro, foot massage and air together, so on those models the choice is hydro plus air or hydro plus foot massage. Some models are always jetted and cannot be ordered as soakers. That group includes the Ultimate, Deluxe and Ultra, the Big4One and ShaK, the hydro-only platforms such as the Standard, Standard60, Zen, Zen60 and Flow, and the Tub4Two, Companion, Escape and Big4Two, which always include at least one massage system.
The Capri is a good example of how the pieces fit together on one model. It comes with a 20 inch wide seat, 15 hydro jets arranged with 9 in the upper section and 6 in the lower section, and an in-line heater, and a heated seat and backrest can be added to it as an option. A second video on this page presents another model in the same way, listing a heated seat as an available option alongside the standard features.
How to Tell What Your Tub Was Built with
Your order is the first thing to check, because it shows exactly what your tub was built with. The tub itself confirms it. Ella walk-in tubs use mechanical push-button controls, and a button or switch is installed only when the matching feature is built in. A few quick checks:
- Read your order or invoice and look for the therapy package, the heated seat and backrest, and the LED light.
- Look at the controls on the tub. A tub with a single water button and no other controls was built as hydro massage only.
- Find the serial number on the label behind the magnetic access panel beside the door.
- If you are still unsure, send photos of the control panel, the deck around the seat and the underside of the tub through the access panel to the team at ellasbubbles.com/support or (800) 480-6850.
The team compares the photos with what the tub was built with. If a feature is on the order and missing from the tub, the team handles it under the warranty. If the feature was never on the order, the team explains what the tub was built with and which options exist for it. The full process is described in My Tub Was Supposed to Have an LED Light or Heated Seat, but There Is No Switch.


Watch: The S-Class: Walk-In Tub with Easy Entry & Heated Seat: Comfortable & Safe Bathing | Ella's Bubbles with chapters and a full transcript.
Related Guides
- Does This Tub Include the Heated Seat and Backrest? Confirming the Configuration Before You Order
- Heated Seat and Back Not Warming Up: Checking the Control Box LED and the Button Prongs
- What the Soaking + Heated Seat & Back Schematic Shows: Three Components, No Pumps, and the Only 15 Amp Callout