Ella walk-in tubs ship to Canadian addresses, but Ella shower bases do not ship to Canada, because a base is fragile and easily damaged in transit. A shower pan can be custom made as a rectangle from 30 by 30 inches up to 44 inches wide by 80 inches long, yet the drain must sit at least 9 inches from each wall, so a drain only 5 inches from a wall cannot be built. Where Can I Buy a Shower Base for a Bathroom Remodel? covers ordering a base in general, and this page answers the Canada question and the wall offset question together.
What Ships to Canada and What Does Not
The two halves of this question have different answers, so it helps to separate the products.
- Walk-in tubs ship to Canada. Ella walk-in tubs are assembled in Chicago and ship to Canadian addresses. The team confirms the delivery address and any customs details with you up front, before the order moves forward. Ella's authorized reseller in Canada is Walk-In Tubs Canada, and your Ella dealer or the team at (800) 480-6850 can tell you how an order for your address is handled.
- Shower bases do not ship to Canada. Shower bases are the exception. They are fragile and easily damaged in transit, so Ella does not send them across the border.
For a Canadian bathroom, that leaves two practical routes. One is an Ella walk-in tub, which does ship to you. The other is a shower base sourced locally. The custom size and drain rules below still matter if you are planning for an address in the United States, or if you simply want to know whether the layout you have in mind is something a finished acrylic pan can do at all.
What a Custom Shower Pan Can Be
Ella's Bubbles manufactures its own acrylic shower bases. Three standard sizes come first, and a custom rectangle covers the spaces those sizes will not fit. The limits are firm and easy to check against your own measurements:
- Shape: rectangles only. Bases with angled or curved edges are not offered.
- Smallest size: 30 by 30 inches.
- Largest size: 44 inches wide by 80 inches long. A 38 by 80 inch base with a left drain is within the limits, while a request such as 53 by 76 inches cannot be produced.
- Shorter than standard: pans shorter than the standard 60 inches are routine custom builds. A 58 by 30 inch base with a center drain has been produced, and so has a 36 by 36 inch corner base.
- Layout: custom bases are made for three-wall alcoves and for corner installations, and the team asks which one you have so the drain and edges are placed correctly.
- Drain: left, right or center, to your order, within the wall distance rule described in the next section.
The full set of size rules is laid out in Can You Get a Custom Size Shower Tray or Shower Base?, and layouts that are awkward rather than simply small are covered in Who makes custom shower pans for odd bathroom layouts?
Why 5 Inches from the Wall Is the Sticking Point
The one firm limit on a custom pan is the drain. It can be placed left, right or center, but it must sit at least 9 inches from each wall. A drain only 5 inches off a wall is inside that margin, so it cannot be built, even as a custom pan. The same rule has already ruled out a drain 7 inches from the threshold edge, so 5 inches is not a borderline case.
It also cannot be solved on site. Ella pans, standard or custom, are finished acrylic. The length, the width and the drain position are all fixed when the pan is made, and the pan is not cut or reworked afterward. The answer to an odd space is a custom order within the rules, not a saw.
If your 5 inches refers to something other than the drain, the answer may be different. People use that figure for different things in a layout, and only the drain position carries the 9 inch rule. That is why the team asks for a drawing instead of answering from a single number. Tell the team where your existing drain line sits in the floor, and it confirms which drain position on the pan matches.
Check the Standard Sizes Before Going Custom
Standard acrylic bases come in 30 by 60, 32 by 60 and 36 by 60 inches, each with a left or right drain. All three share the 60 inch length and differ only in width. If one of them fits, it is the simplest choice, because the drain sits in a set position for that size. What Sizes Do Ella Shower Bases and Shower Pans Come In? lists them alongside the threshold styles.
Threshold is the other choice to make. A custom shower base typically has a threshold of about 3 inches. For a barrier-free entry, zero threshold bases sit flush with the surrounding floor instead of that step, and roll-in bases ship with a self-adhesive collapsible rubber dam that keeps water in while a wheelchair rolls over it. Whichever style you choose, the base arrives as a finished surface that does not need to be tiled over. Your contractor sets the base, connects the drain and finishes the walls around it.
What to Measure and Send
- Measure the finished opening, length and width, where the pan will sit.
- Note whether the space is a three-wall alcove or a corner installation.
- Locate your existing drain and measure its distance from each wall.
- Decide whether you want a threshold of about 3 inches or a zero threshold entry.
- Put those measurements on a simple drawing and send it with a ticket at ellasbubbles.com/support, including the delivery address so the team can confirm what ships there.
With the drawing in hand, the team can tell you exactly what fits: a standard size, a custom rectangle, or neither. If the drain is closer than 9 inches to a wall, you will know that before anything is made. Your Ella dealer or the team at (800) 480-6850 can answer the same questions by phone.
Related Guides
- Custom-Size Shower Bases: Size Ranges, Threshold Options, Drain Placement Rules, Construction, and How to Request One
- What Is the Largest Custom Shower Base Ella's Bubbles Can Make?
- How do you build a custom shower pan or base?