Ella's Bubbles: Shower Column Installation With A 2 Piece Faucet

to install the ls shower column kit with a two-piece faucet set first remove the extendable hand shower and its receptacle place a bead of silicone at the base of the shower column and insert the base unit into the vacant pre-drilled hole we recommend a seven inch height from the tub deck to the middle of the diverter switch insert the rubber gasket and then the metal washer and screw on the metal locking collar tighten the set screws firmly but don't over torque the primary assembly should look like this take the shower column feed line and make sure the gasket is seated correctly then install one end onto the bottom of the shower column and the other to the Brass connection of the faucet hand tighten and then snug each connection one quarter to one half turn the brass wall mount can be adjusted and locked with an allen wrench before setting the wall mount place the Chrome collar and rubber gasket onto the mounting next make sure the Riser tube has a gasket seated properly and tighten the connection and then snug gently with a wrench here's how the assembly should look at this point for the upper mounting bracket Slide the Chrome collar with rubber gasket over the mounting arm make sure the shower Riser is exactly vertical install the wall mounting brackets and then insert the column's mounting arms into the brackets that's the adapter nut to the shower column and then connect the hand shower hose to the adapter nut hand tighten and then snug with a wrench one quarter to one half turn place the hand shower onto its holder this is how the finished assembly should look from the back side and here it is installed in a bathroom Alcove