Ellas Bubbles: Two Piece Fast-Fill Faucet Set Installation video
Chapters in this video
- 0:00 Install Two-Piece Faucet Unit The technician inserts the two-piece faucet unit into the pre-drilled hole, ensuring the gasket is seated correctly.
- 0:18 Secure Faucet with Locking Plate The technician installs the metal locking plate and foam gasket, then hand screws and tightens the attachment bolts and locking nuts.
- 0:43 Connect Hot and Cold Supply Lines The technician attaches the hot and cold supply lines, ensuring the gaskets are seated correctly and tightening them with a wrench.
- 1:10 Install Hand Shower Receptacle The technician places the hand shower receptacle into its pre-drilled hole, ensuring the gasket is seated correctly, and tightens the locking nut.
- 1:32 Attach Shower Hose Line The technician threads the shower hose line through the receptacle, attaches the adapter nut to the brass connector, and tightens it with a wrench.
Installing your Ella's Bubbles two-piece fast-fill faucet set is simple with this step-by-step guide. Learn how to securely attach the faucet, supply lines, and hand shower for a leak-free experience.
Video transcript
Generated from the video's audio, so a word here and there may be off. Chapters above jump to the matching moment.
When ordering an Ellis tub with a two-piece fast fill faucet, it will come with pre-drilled holes for easier installation. Carefully insert the two-piece unit into the main hole. There's a built-in gasket on the bottom of the faucet set. Make sure that's set correctly. The metal locking plate has a cutout for easier installation. There's a foam gasket designed for proper fit and leak prevention. Install both as shown here and hand screw the attachment bolts tightly and then secure with a screwdriver.
Place the locking nuts on the bolts and tighten securely. Give an extra ¼ to ½ extra turn without over torquing. Next before installing the supply lines make sure the gasket is seated correctly. The hot supply line has red markings and the cold has blue markings. Both lines have reverse threads. After hand tightening, add one quarter to one half turn with a wrench. Attach both lines the same way. The piece faucet comes with an extendable hand shower.
The shower line is attached to the tub using a receptacle. There's a built-in gasket at the bottom of the receptacle. Make sure it's seated correctly. Place the receptacle into the pre-drilled hole and hand tighten the plastic locking nut. Secure with an extra one quarter to one half turn with a wrench. shower hose line is attached with an adapter nut. Check for correct gasket seating. Without the adapter nut attached, thread the hose line through the receptacle.
Take the adapter nut and place it on the brass connector, making sure the gasket is seated correctly. Hand tighten and then add ¼ to ½ turns with a wrench. The final assembly should look like this.
Videos