Support Center / Showers, Panels & Accessories / What is a shower slide bar and what is it used for?
Back to Showers, Panels & Accessories

What is a shower slide bar and what is it used for?

A shower slide bar is a wall-mounted bar with a sliding holder that parks your hand shower at the height you choose, at standing height for a rinse or at seated height for hands-free use. It is a holder for the hand shower, not a bar to lean on, and Should I choose a shower slide bar or a grab bar? explains how the two differ. This page covers what the slide bar is, what comes in the Ella kit, how it goes on the wall, and what to choose when you need something else.

What a Slide Bar Is and What It Does

The Ella slide bar is a 24-inch bar that mounts on the wall beside or above your walk-in tub. It has two working pieces. The first is a short slider, about three inches long, that rides up and down the bar and locks at the height you choose. The second is a cradle that rotates, so you can angle the hand shower toward you. The installation video on this page shows the finished bar and describes the holder as easily height adjustable and able to pivot from side to side.

The purpose is simple. On the 5-piece fast-fill faucet as it ships, the hand shower and its hose sit inside the tub, pushed into the holder on the tub deck. To use it, you hold it in your hand. A slide bar gives the hand shower a second place to rest, up on the wall, so the water can run over you while both hands stay free. A seated bather can set the holder low and aim the spray at the shoulders. Someone who prefers to stand for a rinse can slide the same holder up. Each person in the home can set the height that suits them in a moment.

What Comes in the Kit and Why the Coupling Matters

The slide bar is an accessory. It is not part of the 5-piece fast-fill faucet, so it is chosen separately. The kit contains three things:

  • A 24-inch wall-mounted bar with a holder that slides up and down.
  • A 5-foot stainless steel hand shower hose.
  • A coupling kit that seals the hand shower connection.

The coupling is the part people ask about most, and it is the reason the kit is also called a leak elimination kit. A pull-out hand shower normally lives inside the tub, so any drip from its hose falls into the tub. Once the hand shower is parked on the wall, the hose stays pulled out of its receptacle on the deck. The video explains that overextending the handheld shower without the extension and the coupler creates a leak hazard. The coupler creates a waterproof seal at the receptacle, and a rubber washer is what makes that seal. With the kit in place, drips do not end up behind the tub while the hand shower is out. If you do not use a slide bar, the handheld shower is simply pushed back into the tub when it is not in use, and the kit is not needed. The other add-ons that can be chosen for a tub are gathered in Walk-In Tub Accessories and Add-Ons.

How the Slide Bar Goes on the Wall

The video on this page walks through the whole installation of the wall-mounted sliding bar. The order of the steps matters, because the holder has to be on the bar before the top bracket is fixed.

  1. Decide where you would like the bar and check that it is level.
  2. Mark and drill the hole for the lower bracket, which uses the shorter screw. Insert the anchor, tap it in gently until it is flush, tighten the short screw to the wall, and slide the chrome cover over the bracket.
  3. Place the bar into the lower bracket. Slip the hand shower holder onto the bar, then place the upper bracket over the bar, before the upper bracket is secured to the wall.
  4. Mark and drill for the upper bracket and insert the anchor. The longer upper screw goes through the hole provided in the bar. Tighten it and slide the chrome cover over the bracket.
  5. Remove the hand shower, attach the coupler and tighten it. Attach the extension line and hand tighten, then feed the excess line into the receptacle.
  6. Reattach the hand shower and place it into the holder.

Because the bar attaches to the wall and uses the hand shower you already have, it can be fitted on installation day or long afterward. The video closes by noting that the bar can be placed anywhere that is most convenient for you. Can I Add a Hand Shower Slide Bar or Rain Shower Column After My Tub Is Installed? covers adding one to a finished bathroom.

What a Slide Bar Is Not

A slide bar is not a grab bar. The slider holds its position by tension, and when it wears, it creeps down the bar under the weight of the hand shower. That tells you what the bar is built to carry. It holds a hand shower, and it should never be used to steady yourself while stepping in, sitting down or standing up.

Grab bars are the bars meant to be held. Ella air plus hydro jet tubs include two stainless steel grab bars in a chrome finish. An Ella shower kit ships with the grab bar set listed for that kit, packed loose in the carton, and your installer mounts them into the wall's reinforced backing zones with grab bar screws. What Comes in the Box With an Ella Shower Kit explains what is and is not included with a kit.

A slide bar is also not a new water outlet. It does not add a shower head to the bathroom. It holds the hand shower that your faucet already supplies, and the water is still turned on and directed from the faucet.

If You Want an Overhead Shower, or Already Have a Slide Bar

If the goal is a shower head above you, the accessory to look at is the rain shower column. It is a vertical pole with an overhead shower head that mounts at the deck position where the hand shower normally sits. The hand shower connects to the column, and everything is still controlled from the faucet and diverter on the tub deck, so there is no separate valve to install in the wall. The column's supply connection is made behind the tub, so it is best ordered and fitted together with the tub. On a finished installation it can be added only when there is still access to the back of the tub. Some homeowners prefer a conventional shower head on the wall, and a licensed plumber can feed one from the tub's diverter valve. The slide bar, the shower hose and the 10-inch rain shower are listed side by side in Showers, Shower Screens, and Accessories for Your Ella Walk-in Tub.

Two situations change what you need. The Ella waterfall wall-mount faucet already includes a 24 inch slider bar with its hand shower, so there is nothing to add with that faucet. An Ella shower kit is the opposite case. It does not include a hand shower or a slide bar, so choose that hardware with your plumber when you select the valve, and the wall openings can be planned at the same time.

Your Ella dealer or the team at (800) 480-6850 can confirm which accessories suit your model and what is already part of your order.

Video

Watch: Ella's Bubbles: Installing the Wall Mounted Sliding Shower Column with chapters and a full transcript.

Common Questions

Can I hold onto a shower slide bar for support?
No. The slider holds by tension and is built to carry a hand shower, so it is not a support bar. Use the grab bars for support, which are mounted into reinforced backing by your installer.
How long is the Ella hand shower slide bar?
The Ella slide bar is a 24-inch wall-mounted bar. Its holder slides up and down the bar and the cradle rotates, so the hand shower can be set at standing or seated height and angled toward you.
Why does the slide bar kit include a coupling kit?
The coupling seals the hand shower connection at the receptacle on the tub deck, with a rubber washer making the seal. Without the extension and the coupler, an overextended hand shower hose creates a leak hazard. This is why the kit is also called a leak elimination kit.
Can a slide bar be added after the tub is installed?
Yes. The slide bar mounts to the wall and works with the hand shower you already have, so it can be added on installation day or long afterward. A rain shower column is different, because its supply connection is made behind the tub.
Does the Ella waterfall faucet need a separate slide bar?
No. The waterfall wall-mount faucet already includes a 24 inch slider bar with its hand shower. You do not need to add a slide bar kit with that faucet.
Does a slide bar add a shower head to my bathtub?
No. A slide bar only holds the hand shower that your faucet already supplies. For an overhead shower head, look at the rain shower column, which is best ordered and installed together with the tub.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket