Yes on both counts, with one thing to settle before the tub is built. Most Ella models are available as a soaker with no jets and no jet holes, as laid out in Soaking-Only Walk-In Tubs: No Jets, No Pumps, No Electrical. A tub with no faucet or control holes is available as well, but only as a special order that has to be requested before the shell is drilled.
No Jets and No Holes Are Two Separate Requests
People often ask for both in one breath, but they are decided in different ways, and it helps to keep them apart when you talk to your Ella dealer or the team at (800) 480-6850.
- No jets is a package choice. A soaking package has no jets, no jet holes and no pumps. It is a listed option on most models.
- No faucet or control holes is a drilling choice. Every tub is drilled to order for the faucet and controls chosen with the order, so an undrilled deck is a special order that has to be requested before the shell is drilled.
The part that surprises people is that leaving the faucet off does not by itself give you a blank deck. Standard production decks are drilled for the Ella faucet layout even on a seated tub ordered without the Ella faucet set. No plugs or cover plates come with a no-faucet order either. If you want a deck with no holes, say so in those words, and say it early.
Which Models Can Be Built with No Jets
These models are available as soakers:
- Stainless inward-swing door: Elite, Petite, Royal.
- U-shape outward door: Capri, Monaco, Front Entry, Mobile, Lounger.
- Transfer family: Transfer26, Transfer30, Transfer32, Transfer60, TransferXXL.
- LayDown 30x60 and 32x72. The LayDown soaker has no therapy controls at all.
These models are always jetted, so a no-jets version is not offered:
- Ultimate, Deluxe, Ultra.
- Big4One and ShaK.
- Standard, Standard60, Zen, Zen60, Flow.
- Tub4Two, Companion, Escape and Big4Two, which always include at least one massage system.
If one of the always-jetted models is your size and you want a simple tub, the team usually points to the Capri or the Elite as the soaker alternatives. There is no in-between version to ask for. A tub cannot be built with fewer jets than its therapy package specifies, because jet counts and layouts are set per package. The choice is the full package or the soaker. Soaking tubs are also built in smaller runs, so check availability before you plan around one.
What Is Still on a Soaker
A soaker is not a bare shell. Everything structural matches the jetted version, and the standard soaker still carries its fittings:
- Acrylic shell on a stainless frame, with the door and seal.
- Grab bars and a textured floor.
- The fast-fill faucet and hand shower.
- Dual 2 inch drains, or a single drain on the Front Entry and Mobile.
- The end panel, and the extension panel where offered.
So even with no jets, a standard soaker deck has openings for the faucet set, and the deck grab bar fastens through two holes in the acrylic deck that are placed at the factory. The page on whether Ella can factory-install a grab bar from another supplier explains how those two holes fix the spacing for anything that replaces the standard bar. The same page notes that a faucet, unlike a grab bar, can be left off your order and supplied on your own.
Two things are absent on a soaker because they belong to the therapy systems. The LED chromatherapy light is not included, since it comes only with dual therapy packages. The in-line water heater is part of the hydro system, so a soaker has no heater. A plain soaker needs no electrical outlet because the drains are gravity driven. The one exception is the optional heated seat and backrest, where the published schematic calls for a 15A 120V GFCI-protected line for the heater alone. If you are weighing a jetted package against a soaker, how to get the electrical diagram for your tub shows where the diagram for each configuration lives.
What the Controls on a Jetted Tub Look Like
It helps to know what you are asking to leave off. The hydro massage video on this page shows the controls a hydro package puts on the tub: the massage is engaged with easy touch buttons or a digital touch pad, and every Ella walk-in tub with hydro massage also has an intensity control dial. Turning the dial up introduces more air into the jet stream for a stronger flow, and turning it down makes the flow more gentle. Those controls go with the therapy package, and a soaking package has no pumps to run. For a seated soaker, ask the team to confirm exactly what the deck of your build will carry, so there are no surprises when the tub arrives.
How to Request It Before Production
- Choose a model that is available as a soaker, and check availability with your Ella dealer or the team at (800) 480-6850.
- Decide on the faucet. You can keep the Ella fast-fill faucet and hand shower, supply your own, or have none on the deck.
- If you want no faucet or control holes, ask for it as a special order before your order goes into production. It has to be requested before the shell is drilled.
- Ask the team to confirm the deck drilling for your exact build.
- If your tub will have the standard drilled deck and no Ella faucet, plan for your own covers or a deck-mount set that matches the holes, because no plugs or cover plates are supplied.
Timing is the whole point here. Control positions cannot be moved once the tub is built. Therapy systems are built into the shell at the factory, so jets cannot be added to a soaker later either. The decision you make before production is the one the tub keeps.

Watch: Walk-In Tub With Hydro Massage Control Dial, Customize Your Comfort | Ella’s Bubbles with chapters and a full transcript.
Related Guides
- Can I order a walk-in tub with no faucet holes, and what is the lead time?
- Can Hydro or Air Jets Be Added to an Ella Soaking Tub Later?