Ella's published cleaning guidance does not name Scrubbing Bubbles, so there is no verdict from Ella on it either way, and the safest choice is a cleaner that is named. Lysol Power Bathroom is different: some Ella model manuals list it among the approved cleaners for the acrylic shell. The everyday answer for any Ella walk-in tub is still mild dish soap or a 1 to 1 mix of white vinegar and water on a soft cloth, as explained in What Can I Safely Clean My Walk-In Tub With?.
What Ella's Guidance Says About These Two Products
The two cleaners people ask about most often end up in different places, so it helps to take them one at a time.
- Scrubbing Bubbles. It does not appear among the products named in Ella's cleaning guidance. That is not a statement that it harms acrylic. It means Ella has not published a verdict, so nobody can confirm how the glossy shell responds to it. Ella's guidance treats products that are not on the approved list as a likely cause when a finish has been dulled or discolored, which is a good reason to choose a named product instead.
- Lysol Power Bathroom. The printed Ella cleaning instructions approve a core group of products, and some model manuals add Lysol Power Bathroom, CLR Bath & Kitchen and Iron Out to that group. If your manual lists Lysol Power Bathroom, you can use it on the acrylic shell with a soft cloth or sponge, following the product directions and rinsing well. If your manual does not list it, stay with the core list below or check with your Ella dealer or the team at (800) 480-6850.
Either way, the name on the front of the bottle matters less than what is inside it. Ella's guidance comes down to three things that must never touch the acrylic: abrasive products, bleach, and harsh chemical corrosives. Bleach used regularly can damage acrylic over time, so read the label of any bathroom cleaner before it goes near the tub, and set aside any version that contains bleach or a gritty scrubbing ingredient.
The Cleaners Ella Does Name, Job by Job
You do not need an unlisted product, because every common cleaning job already has an answer in Ella's guidance. Step up within the list instead of reaching for whatever is under the sink.
- Everyday film: mild dish soap, Dawn, Formula 409, or the 1 to 1 mix of white vinegar and water. Wipe with a soft cloth or sponge about twice a month, then rinse and wipe dry.
- Soap scum or hard water film: Scrub Free Original Soap Scum Remover or Kaboom with OxiClean. Follow the product directions and rinse well.
- Stubborn marks regular cleaning will not lift: denatured alcohol or an acrylic-safe bathtub surface cleaner on a soft cloth, then rinse.
- Sticker glue, caulk or construction debris after installation: mild detergent first, then denatured alcohol or Clorox Soft Scrub, then rinse.
The printed Ella cleaning instructions also approve the Simple Green, Tilex, Pine-Sol and Clorox Fraganzia products. Whatever you choose, the tool is always a soft cloth or sponge. The surface-by-surface version of this advice, including the glass screen and the chrome, is in How do I clean a walk-in tub without damaging the finish?.
Why Acrylic Needs a Named, Gentle Cleaner
Every current Ella walk-in tub has a white acrylic bathing surface. The acrylic is roughly 1/8 to 3/16 inch thick, and the white runs through the sheet instead of sitting on top as a thin finish layer. There is no coating to wear through, so the shell keeps its glossy white finish for many years as long as abrasives, bleach and harsh chemical corrosives stay away from it.
That is also why advice written for a fiberglass or gelcoat shower does not carry over. A cleaner or a tool that is routine on another kind of bathtub can be the wrong choice on an Ella shell. The clearest example is the melamine sponge. Ella's cleaning instructions group Mr. Clean Magic Eraser pads with scouring pads and scouring powders, because all of them permanently scratch and dull the surface. If you were planning to pair a spray cleaner with one of those sponges, please read Can I Use a Magic Eraser on My Walk-In Tub Acrylic? first.
There is a warranty reason to stay gentle as well. Damage from scouring is listed as an exclusion in the finish warranty, so a patch that has been scratched dull is not something the warranty repairs.
If You Have Already Used a Spray Cleaner on the Tub
One use of an unlisted cleaner does not have to mean trouble. Work through these steps calmly.
- Rinse the shell thoroughly with clean water and wipe it dry with a soft cloth.
- Look at the surface in good light. You are checking for a dull patch, a haze that rinsing does not remove, or discoloration.
- If the finish looks as glossy as before, simply switch to mild dish soap or the vinegar and water mix from here on.
- If you see a dull patch, haze or discoloration, stop using the product. Contact your Ella dealer or the team at (800) 480-6850, or open a request at ellasbubbles.com/support. Include your model, a photo of the affected area and the name of the product you used.
A dulled area is often recoverable. Because the acrylic is solid through the shell, light scratches or a dull area can be worked with a fine grade automotive polishing compound such as Turtle Wax, applied in small circles. It is still work you can avoid entirely by staying with the approved cleaners.
Surface Cleaners Stay on the Shell, Not in the Jets
A bathroom spray is a surface product. It belongs on the acrylic, wiped and rinsed, and not in the bath water where the pumps would circulate it through the jet lines. The lines have their own routine: mix 2 cups of white vinegar with 2 cups of water, fill the tub to 1 inch above the highest jets, add the mixture, run the tub for 10 minutes, then drain. Do this once before the first bath and once a month after that.
Ella's technical support has confirmed one store-bought alternative for the lines, a jetted tub cleaner called Nutra-Max, and no other product in that category has a published verdict. The details are in Can I Use a Store-Bought Jetted Tub Cleaner Instead of Vinegar?. Bleach is not part of Ella's instructions for the jet lines either.
Two more limits are worth knowing. Glass screens are cleaned with warm soapy water alone, and chrome gets a rinse and a dry wipe. Muriatic acid must never be used anywhere near the tub. If tile above the tub needs acid cleaning, protect the tub fully and keep the product and its fumes away from the acrylic and chrome.
Related Guides
- What should I use to clean, sanitize and whiten my walk-in tub?
- Which cleaners are safe for my walk-in tub, and which chemicals should I avoid?