Ella does not publish one width for the reversible end panel, because it is not a one-size part. Each end panel is cut for a specific model and door side, and it covers the short end of the tub, so its size follows the tub you own, from the 26 inch wide Mobile to the 36 inch side of the ShaK. The same panel serves a left corner or a right corner, as What Is an End Panel on a Walk-In Tub? explains.
Why There Is No Single End Panel Width
An end panel is a finished cover for a short end of the tub. It hides the shell edge, the plumbing and the frame, so the exposed end looks as finished as the front. Because it has to match the end of one particular tub, Ella cuts end panels for a specific model and door side instead of making one panel in one size for the whole lineup.
That is why you will not find a single width figure for the reversible end panel in the published materials, and why this page does not give one. What the published materials do give is the width of each tub, which is the end the panel finishes. The ShaK is the clearest example, because it includes one end panel for the 36 inch side. A compact tub has a much narrower end, so its panel is a different part.
If you need an exact panel measurement for framing, tile or trim work, ask for it by model. Estimating from a different tub, or from a neighbor's installation, is the usual way a corner ends up with a gap or a panel that does not sit flush.
The Short End Each Panel Covers, by Model
The table lists the actual tub width for the models with a published figure. This is the short end that the end panel finishes. The panel's own cut width is not published for any of them, so that column is marked honestly.
| Model | Actual tub width (the short end) | Published end panel width | What it means for a corner |
|---|---|---|---|
| Mobile | 26 inches | not listed | The narrowest exposed end in the lineup |
| Petite | 27.5 inches | not listed | A slim end for a tight bathroom |
| Deluxe | 29.5 inches | not listed | Just under the common 30 inch end |
| Transfer60 | 29.5 inches | not listed | A full 60 inch tub with a 29.5 inch end |
| Ultimate | 29.625 inches | not listed | A 60 inch class tub with an end slightly under 30 inches |
| Elite | 30 inches | not listed | The common 30 inch end |
| Standard | 30 inches | not listed | The common 30 inch end, with the end panel on the faucet side in an alcove |
| ShaK | 36 inches | not listed | One end panel is included for the 36 inch side |
What the differences mean for you: the exposed end of an Ella tub can be anywhere from 26 inches to 36 inches across depending on the model, a spread of 10 inches. A panel cut for one model will not suit another, and even two tubs that both measure about 30 inches wide are separate models with their own panels. Treat the tub width as a planning figure for the room, such as how far the finished end will reach out from the back wall, and treat the panel itself as a part that is matched to your model and door side. Panel height is not published either, so confirm it the same way if your trim work depends on it.
Left Corner or Right Corner, It Is the Same Panel
You do not choose a left panel or a right panel for a corner. Every Ella walk-in tub comes with one reversible end panel that can be placed on either side of the tub. If the tub sits in the right side corner of the bathroom, the wall covers the right end and the panel goes on the opposite left side, covering the plumbing and the frame. If the tub sits in the left corner, the panel is reversed and goes on the right.
The video on this page shows exactly this: the panel being placed on either end of a tub, and the case where a second panel is needed because both ends are open. What Does Free End Panel Mean, and Is One Included With Every Tub? walks through each room layout and how many panels it calls for.
Reversible describes where the panel can go on your tub. It does not mean the panel fits any tub. The width question and the left or right question are separate, and only the second one has a universal answer.
Do Not Confuse the End Panel with the Extension Panel
Many width questions are really about a different part. The end panel does not add any length to the tub. The part that does is the extension panel. Any Ella walk-in tub that is less than 60 inches long comes with an extension panel so the tub fits a standard 60 inch alcove, and it can be placed on the right side or the left side of the tub.
The Standard shows how the two work together in an alcove: it uses a 7 inch extension panel on one side and the end panel on the faucet side. Which Ella walk-in tubs fit a 30 by 60 inch alcove? sorts the models by how each one fills that opening.
In a true corner, the extension panel usually has no job to do, because there is no alcove wall to close a gap against. The front apron faces the room and the reversible end panel finishes the open end. That layout is described in Can a walk-in tub replace a triangular corner garden tub and fill the space?, including what your installer does with the floor area the new tub does not fill.
What to Have Ready and What to Check on Site
Because panels are cut for a specific model and door side, any question about panel size, a second panel or a replacement goes faster with three details in hand.
- Your model. The model decides which end the panel was cut to finish.
- Your serial number. It is on the label behind the magnetic access panel next to the door.
- Your door side. Say whether the door is on the left or the right.
Take those to your Ella dealer or the team at (800) 480-6850, or send them through ellasbubbles.com/support, and ask for the panel measurement for your exact tub before any framing or tile is finished around the exposed end.
A few points are worth checking while you plan the corner.
- The long back side has no factory cover on any model, so it must face a wall or a knee wall your contractor builds. The end panel does not wrap around to the back.
- If both short ends will be open to the room, a second end panel is a separate purchase. It is the same reversible part, and How Do I Install a Second End Panel on a Freestanding Ella Tub? covers fitting it.
- The Front Entry is the exception to the one-panel arrangement. It includes two side end panels because its door is at the end of the tub.
- The panel attaches with two white screws. They are often taped to the back of the panel or tucked in the parts box inside the tub, so look there first.
- All removable panels, including the end panel, the extension panel and the front apron, come off before the tub is moved into the house, and the tub is lifted only by its frame.
- The panel goes on after the tub has been moved into place, leveled and water tested.
If your layout is a three-wall alcove where both ends meet a wall, you can opt out of receiving the extra end panel to reduce plastic waste.
Related Guides
- What Is an Extension Panel (Filler Kit) on a Walk-In Tub?
- How to Add a Second End Panel to Your Walk-In Tub Order or Buy One Later
- Can an Ella End Panel or Extension Panel Be Trimmed to Fit?