The correct door seal is matched to your exact tub rather than picked from a size chart, because gaskets vary by model and production year. If the replacement you received looks too big, send your model, your serial number and clear photos through ellasbubbles.com/support or call (800) 480-6850, and the team will match the correct gasket and send the right one. The standard request process is in How Do I Get a Replacement Door Seal for My Walk-In Tub?, and this page covers how the match is made and what to do when the seal in your hands does not seem to fit.
Why There Is No Seal Size Chart
Each Ella door uses its own seal size. The seal is specific to the door type, and within a door type gaskets vary by model and by production year. That is why a replacement is matched to your model and serial number instead of being supplied as a generic length or profile.
This works in your favor. You do not need to measure the length of the old seal or describe its profile as a T shape, a D shape or a bulb size. The team matches the seal from your numbers.
Your serial number is on the label behind the magnetic access panel next to the door, on the seat side of the front apron, and it normally begins with the letter M. If the label is gone, the team can usually find the order from the original purchaser's name, email or shipping address, and a clear photo of the seal profile helps confirm the match.
Door Styles and How Each Seal Is Matched
Ella walk-in tubs use five door styles, and the seal follows the door. The published sources do not list a seal dimension for any of them, so the table shows what is known and what the team needs from you.
| Door style | Models named in the sources | Seal size | What it means for your replacement |
|---|---|---|---|
| Inward-swing acrylic door | Standard, Zen, Zen60 | not listed | Matched by model and serial number |
| Inward-swing stainless steel and glass door | not listed | not listed | Matched by model and serial number |
| Outward-swing U-shape composite door | Capri, Monaco, Front Entry, Mobile, Lounger, ShaK, Big4One | not listed | Matched by model and serial number |
| L-shape Transfer door | Transfer family | not listed | Matched by model and serial number |
| LayDown glass door | LayDown, both sizes | not listed | Matched by model and serial number |
What this means for you is that knowing your door style narrows the field, but it does not settle the seal on its own. Two tubs with the same door style can still take different gaskets, depending on the model and when the tub was made. The serial number is what makes the match exact. If you want to confirm your door style first, the five Ella door styles are listed by model at ellasbubbles.com/walk-in-tub/door-types/. The seal itself is explained in What Is the Door Seal on a Walk-In Tub?
When the Seal You Received Looks Too Big
A seal that seems oversized is not always the wrong seal. Before you conclude that the wrong part was sent, check three things.
- Check the leveling legs. Confirm that every leveling leg touches the floor. A door sitting low can make a correctly sized seal look wrong. Leveling is also the number one cause of a door leak, because a leg that has lost contact with the floor lets the frame warp, and the door no longer meets the seal evenly.
- Check the shape of the new seal. New seals sometimes arrive stuck or slightly flattened from shipping. That is normal. Squeeze the seal with your fingertips and pull it away from the door frame to restore its shape, then wipe it with rubbing alcohol.
- Check how the door hangs. Open the door fully and look at it from the side. A door that droops or tilts when open is riding on a bent hinge, and the seal drags on the frame as it closes. A new seal will not fix a door that is not level. See Bent or Loose Door Hinge: Diagnosis, Tightening, and Replacement for that check.
It is also worth making sure the part in question is the tub door seal. The gasket on a glass shower screen is a different part with its own fit rules, covered in Why Does My Shower Screen Gasket Have a Gap and Spray Water?
What to Send so the Right Seal Ships
If the seal still looks wrong after those checks, the team needs to see what you are seeing. Open a ticket at ellasbubbles.com/support or call (800) 480-6850 with the following:
- Your tub model and serial number.
- A clear photo of the seal you received.
- A photo of the seal in its groove on the door.
- A photo of the point where water appears, if the door is leaking.
- A note on whether all leveling legs touch the floor.
With the serial number and those photos, the team matches the correct gasket for your tub and sends the right one.
Warranty, and a Note for Dealers and Installers
The door seal is covered by the Lifetime Limited Warranty and has no scheduled replacement interval. When a replacement is warranted, the team ships one after a support ticket with your serial number and clear photos of the seal and the leak point. Ella does not send technicians, so a local licensed plumber or installer fits the part if you would rather not do it yourself.
Dealers and installers who keep door seals on hand can avoid a mismatch at the ordering stage. A stock request should state the tub model and size each part fits, plus the door side for hinge and gasket parts. For a seal that replaces one on an installed tub under the warranty, include that tub's serial number. The full list is in Dealers and Installers: Ordering Spare Parts to Keep on Hand.
Related Guides
Related Videos
