Support Center / Warranty & Registration / Does the Ella warranty stay valid if I mount my own faucet on the tub deck?
Back to Warranty & Registration

Does the Ella warranty stay valid if I mount my own faucet on the tub deck?

Yes. Fitting your own faucet on the deck of an Ella walk-in tub does not take away the tub's own published coverage. The published warranty plans for this case: a non-Ella brand faucet carries only its own manufacturer's warranty, and the rest of the tub keeps its coverage either way. What deserves care is how the faucet is mounted, because the warranty excludes alteration or modification of the tub by anyone other than Ella's Bubbles. The choice of faucet itself is covered in Can I Use My Own Faucet Instead of the Ella Fast-Fill Faucet?, and this page looks only at what a deck-mounted faucet of your own means for coverage.

What the Warranty Says About a Faucet That Is Not an Ella

Ella's Lifetime Limited Warranty covers the bathtub shell, frame, door, door seal and finish. The supporting equipment is covered for parts as well, and the faucet is named in that list together with the motors, pumps, fixtures, electronic controls, waste and overflow. Two published exceptions sit beside that list. The thermostatic control valve has a 1-year limited warranty, and non-Ella brand faucets carry only their manufacturer's warranty.

In practice that splits the coverage into two clear parts:

  • Your faucet. If a faucet you supplied develops a fault, the part, the cartridge and any claim belong to the company that made it. Keep its paperwork with your tub documents.
  • Your tub. The shell, frame, door, door seal, finish and the Ella equipment on the tub keep their own published coverage. Choosing a different faucet brand does not change that.

Coverage is for parts only in every case. Ella does not send technicians, so a local licensed plumber does the labor, whether the faucet on the deck is an Ella set or your own.

Factory Holes Are Fine, New Holes in the Tub Are the Risk

The warranty question is really about the deck. Every Ella tub is drilled at the factory for the faucet chosen on the order, so the deck is drilled to order. Even where a no-faucet order is possible on a seated model, the deck still arrives drilled for the Ella set. That gives you a clear, low-risk route: choose a deck-mount faucet that matches the holes already in the deck, or plan cover plates for any hole you do not use. Mounting a faucet through holes the factory made is using the tub the way it was built to be used.

Making new holes in the tub is a different matter. The warranty's general exclusions include alteration or modification, and products modified or repaired by anyone other than Ella's Bubbles fall outside the coverage. Ella's own guidance for grab bars shows how seriously that is meant: extra bars go on the wall, never drilled into the tub shell or deck, because any alteration not done by Ella is excluded from warranty coverage. The same thinking applies to a third-party grab bar swapped onto the factory holes. The replacement part carries only its own maker's warranty, and Ella cannot warranty damage to the shell caused by a part it did not make.

You may have read that drilling for a faucet does not void the warranty. That statement is about Ella acrylic showers, where the faucet and grab bar holes are not predrilled and drilling them is an expected installation step. It is explained in Does Drilling Holes for a Faucet or Grab Bars Void the Ella Warranty?. A walk-in tub deck is drilled at the factory, so do not carry the shower rule over to the tub. If your faucet needs holes that are not already there, ask the team before anyone picks up a drill.

Deck or Wall: What Each Tub Expects

Whether a deck mount is even the natural choice depends on the model:

  • Seated walk-in tubs. These are normally ordered with the fast-fill faucet set and pull-out hand shower already included. The 2-piece and 5-piece sets both come with the extendable multi-function hand shower, two 3/4 inch braided supply lines and the diverter, so leaving the Ella set off means your plumber supplies those pieces as well.
  • LayDown72. This model is faucet-ready and offers optional Ella deck-mount faucets. At order time the choice is No Faucet, 2-piece or 5-piece. The product video shows the tub presented with either a five-piece fast-fill faucet set or a two-piece fast-fill faucet set, each with an extendable multi-function hand shower.
  • LayDown60. This model is never ordered with a factory faucet and has no faucet option at all. It needs a pre-existing faucet or a new customer-supplied one, and that is typically wall-mounted. On this tub the wall, not the deck, is the expected place for the faucet.

The model-by-model planning, including cover plates and wall-mount setups, is in Using Your Own Faucet: No-Faucet Orders, Pre-Drilled Decks, Wall-Mount Options, and Which Tubs Require a Customer-Supplied Faucet.

What Really Can Cost You Coverage

A different faucet brand is not on the list of things that void the warranty. These are the published items to watch while the faucet work is being done:

  • Modification or repair by anyone other than Ella's Bubbles. Cutting or altering the shell, frame or equipment puts the product outside the warranty.
  • Improper or negligent installation. Improper installation is excluded and labor is never covered. A tub that is not level is the classic example, because the door and door seal warranty depends on correct door alignment.
  • Plumbing connections and water damage. Installation, plumbing and electrical connections are excluded, so a leak at a supply connection your plumber made is the installer's responsibility, not a parts claim.
  • Moving the tub or changing ownership. The warranty covers the first purchaser only, is nontransferable and is tied to the original installation address.
  • Skipping activation. Activation is required to put the coverage in force. The two-page form is signed by both the customer and the installer and returned with a copy of the sales receipt.

If you keep an Ella thermostatic set instead of your own faucet, remember that the thermostatic control valve has its 1-year limited warranty, and cartridge fouling from calcium, iron or contaminated water is not covered. Fit an inline filter or mesh and clean it periodically.

What to Do Before the Plumber Starts

  1. Confirm how your tub is drilled. The deck is drilled for the faucet on your order, so check your order paperwork or look at the deck itself.
  2. Match your faucet to those holes. Choose a deck-mount faucet that fits them, and plan cover plates for any hole that will stay empty.
  3. Ask before any drilling or cutting. For a specific question about how a plumbing choice affects coverage, contact your Ella dealer or the team at (800) 480-6850, or open a ticket at ellasbubbles.com/support, before the work is done.
  4. Have the supply lines connected on site. An Ella faucet is assembled on the deck at the factory but is not hooked up to the supply lines, so that connection is always made by your installer.
  5. Keep both sets of paperwork. File the faucet maker's warranty with your Ella documents, and return the signed activation form so the tub's coverage is in force.

If you are also thinking about extra support bars while the walls are open, Where and how should grab bars be installed around a walk-in tub? explains why those belong on the wall framing and not on the tub.

Video

Watch: Lay Down Tub: 32x72 Walk-In Tub with Hydro Massage Jets - Your Own Home Spa | Ella’s Bubbles with chapters and a full transcript.

Common Questions

Does a non-Ella faucet void the warranty on the whole tub?
No. The published warranty states that non-Ella brand faucets carry only their manufacturer's warranty. The rest of the tub keeps its own published coverage either way.
Who replaces my own faucet if it starts to leak?
The company that made the faucet handles the part, the cartridge and any claim. A local licensed plumber does the labor, because Ella does not send technicians and labor is never part of the coverage.
Can my plumber drill new holes in the tub deck for my faucet?
Ask the team first. The deck is drilled at the factory for the faucet on your order, and the warranty excludes alteration or modification by anyone other than Ella's Bubbles. Contact your Ella dealer or the team at (800) 480-6850 before any drilling is done.
Is a deck-mount faucet possible on the LayDown60 tub?
The LayDown60 has no faucet option at all. It needs a pre-existing or new customer-supplied faucet, and that is typically wall-mounted.
What happens to the factory holes if my faucet does not use them all?
The deck arrives drilled for the Ella set even on a no-faucet order. Plan a matching deck-mount faucet or cover plates so every hole is accounted for before the tub is installed.
Does the warranty pay my plumber to install my own faucet?
No. The warranty is for parts only, and installation, plumbing and electrical connections are excluded. Labor is the responsibility of the installer who does the work.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket