Support Center / Showers, Panels & Accessories / Can the Drain on the 32x60 Roll-In Shower Base Be Moved?
Back to Showers, Panels & Accessories

Can the Drain on the 32x60 Roll-In Shower Base Be Moved?

No. The drain on the 32 by 60 roll-in shower base is formed as part of the mold in the floor of the pan, so its position cannot be shifted for an individual order or after the base is made. What you do choose is the configuration, because the 32 by 60 barrier-free roll-in base is offered with a left or a right drain, and you pick the one that lands over the line already coming up through your floor. Can I Choose a Left, Right, or Center Drain on an Ella Shower? explains the rule for every Ella shower, and this page applies it to the 32 by 60 roll-in and lays out your routes when the drain does not line up.

Why the Drain Stays Where It Is Molded

An Ella base comes out of a mold at the factory as a finished acrylic piece that already carries the drain, the slope and the threshold. The drain opening is part of the floor of the pan, not a fitting that is added later, so there is nothing to slide over or re-drill. Because the location is set when the base is made, Ella does not offer alternate drain positions on a given base and cannot relocate the drain on request.

The pan surface is finished acrylic, so it needs no tile and is ready to use once your contractor sets it and connects the drain. That finished surface is part of what makes the base simple to install, and it is also why the drain location has to be right before the base arrives.

What You Can Choose: The Left or Right Configuration

The 32 by 60 barrier-free roll-in base is made in both left and right drain configurations, and it is a stock item. Each configuration has a set drain position. So the real question is not whether the drain can move, it is which of the two set positions matches your floor. As the live article Do you make a barrier-free 32x60 shower base with a right-hand drain? puts it, the right-hand question is really a question about your floor: the drain hole in the pan has to land over the drain line that already comes up through the floor, or your contractor has to move the line.

In a typical tub to shower conversion this works out well. A bathtub alcove is already a rectangle, the old tub drain sits toward one end, and one of the two configurations is chosen to suit it. The team asks where your existing drain sits before confirming the configuration, so the measurements below are worth taking before you call.

Measure Your Existing Drain Before You Order

  1. Measure the opening from finished wall to finished wall, front to back and side to side.
  2. Measure where the existing drain line comes up: its distance from the back wall and from each side wall. Measure to the center of the drain.
  3. Note whether the floor is a concrete slab with no access from below, because that limits how far the line can be moved.
  4. Make a simple drawing of the space that shows the walls, the entry side and the drain, with the figures written on it.
  5. Compare your figures with the drain location on the Specification drawing for the base. Ask your Ella dealer or the team at (800) 480-6850 for the drawing if you do not have it.
  6. Open a ticket at ellasbubbles.com/support with the drawing, or call (800) 480-6850 with the figures, and the team will confirm which drain position matches your size.

Do this check before the order is placed. A drain that does not line up is usually discovered only when the base is set on the floor, which is the hardest point to change course. Will an Ella shower base fit my space and existing drain location? walks through the wider fit check for the room, step by step.

If Neither Set Position Lines Up

When the left and the right configuration both miss your drain line, there are three routes, and none of them involves altering the base.

  • Have a licensed plumber relocate the drain line. A licensed plumber can tell you whether your floor construction allows the trap to be moved to match the base. A framed floor with access from below usually gives more room to work than a concrete slab with no access, which limits how far the line can be moved.
  • Order a custom size base. Ella makes a custom base as a rectangle up to 44 inches wide by 80 inches long, with the drain placed left, right or center, as long as it sits at least 9 inches from each wall. This is the route for matching an existing drain exactly. Custom bases are rectangles only.
  • Look at a different standard roll-in size. The 30 by 60 and 36 by 60 roll-in bases also come with a left or right drain, and the 48 by 60 and 50 by 50 roll-in bases have a center drain. If your opening allows a different footprint, a different base may put its drain where your line already is. What Are the Standard Shower Base Sizes Ella's Bubbles Makes? compares the footprints.

Your plumber's answer usually decides between these. If the line can be moved within the space available, the stock 32 by 60 base will work. If it cannot, the custom base or a different size is the better path.

What to Weigh If You Need Wheelchair Entry

The reason many people choose the 32 by 60 roll-in in the first place is the entry. It is a curb-less pan with a beveled roll-in entry that a wheelchair or walker crosses without a step. The AcrylX barrier-free bases have a beveled roll-in entry of 3/4 inch to 1 1/8 inch depending on size. The base ships with a self-adhesive collapsible rubber dam across the entry, which compresses under a wheel and springs back once the chair is inside, so water stays on the pan.

Keep that entry in mind when you compare routes. Moving the drain line keeps the stock roll-in base and its flat entry exactly as designed. A custom base solves the drain position, but the published guides describe custom bases with a raised threshold in some builds and a zero threshold in others, so confirm the threshold with your Ella dealer or the team at (800) 480-6850 before you settle on a custom base for a bather who stays seated in a wheelchair or shower chair.

Who Does the Drain Work

Ella does not send technicians, so the drain connection is made by your local licensed plumber, and so is any relocation of the line. Share the Specification drawing and your measurements with the plumber before the old tub comes out, so the decision between the left configuration, the right configuration, a relocated line or a custom base is made on paper and not on installation day.

Common Questions

Can Ella move the drain on a 32x60 roll-in base for my order?
No. The drain is formed as part of the mold in the floor of the pan, so its position cannot be shifted for an individual order. You choose between the left and the right drain configuration instead.
Does the 32x60 roll-in base come with a right drain?
Yes. The 32 by 60 barrier-free roll-in base is made in both left and right drain configurations, and it is a stock item. The team confirms which one matches your floor from your drain measurements.
What can I do if my drain matches neither position?
You have three routes. A licensed plumber can relocate the drain line, you can order a custom size base with the drain placed to suit, or you can look at a different standard size whose drain location fits your floor.
How close to a wall can a custom base drain sit?
On a custom base the drain can be placed left, right or center, as long as it sits at least 9 inches from each wall. Custom bases are made as rectangles up to 44 inches wide by 80 inches long.
Who connects the shower base to my existing drain line?
Your local licensed plumber makes the drain connection and handles any relocation of the line. Ella does not send technicians. The team at (800) 480-6850 can supply the Specification drawing your plumber needs.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket