Ella's Bubbles: TCV Valve Temperature Adjustment
Chapters in this video
- 0:00 Adjusting the TCV Valve The video demonstrates how to remove the set screw cover and loosen the set screw to access the temperature control valve.
- 0:35 Setting Hotter Water Temperature The video shows how to internally set the TCV for hotter water by adjusting the handle on the brass fitting.
- 0:56 Finalizing the Temperature Adjustment The video instructs viewers to ensure the anti-scald button is set correctly, then tighten the set screw and replace its cover.
Adjusting the thermostatic control valve (TCV) on an Ella's Bubbles walk-in tub allows for hotter water. This video demonstrates how to access and internally set the TCV for increased water temperature.
To get hotter water from your TCV faucet, first remove the set screw cover and loosen the set screw with an Allen wrench. Inside the TCV handle, a spring-loaded locking pin acts as the anti-scald mechanism, setting against a locking collar. The button on this pin must be pushed to increase the temperature, and it springs back when set at 100.4 degrees Fahrenheit.
To internally set the TCV for a hotter water temperature, place the handle on top of the brass fitting and turn it to warmer water. Briefly take the handle off the brass fitting, then reset it, turning the handle a quarter turn counterclockwise. This adjustment allows more hot water to flow through the valve, increasing the water temperature.
After adjusting the temperature, ensure the anti-scald button is set correctly. Retighten the set screw with the Allen wrench and replace the set screw cover. This process addresses issues where the tub water is too hot or the hand sprayer runs hot but the tub spout is only lukewarm.
- Remove set screw cover
- Loosen set screw with Allen wrench
- Adjust handle on brass fitting
- Ensure anti-scald button is set
- Retighten set screw
Step by step help for this topic: The Thermostatic Control Valve (Anti-Scald): Which Faucets Have It, Its Setting, and Water-Heater Advice, Hand Sprayer Runs Hot but the Tub Spout Is Only Lukewarm: What to Check and Temperature Control Valve (TCV) Stuck or Not Mixing: Cleaning the Cartridge and Replacing the Valve.
Video transcript2 paragraphs · 1:16
To adjust your temperature control valve for hotter water, first remove the set screw cover and loosen the set screw with an Allen wrench. Inside the TCV handle you'll see a spring-loaded locking pin. This is the anti-scald mechanism. The pin sets against the locking collar. The button must be pushed to increase the temperature. The button springs back when set at 100.4 degrees. To internally set the TCV to a hotter water temperature, first place the handle on top of the brass fitting and turn to warmer water.
Briefly take the handle off the brass fitting and then reset it, turning the handle a quarter turn counterclockwise. This will allow more hot water to flow through the valve and increases the water temperature. Make sure the anti-scald button is set correctly. Retighten the set screw with the Allen wrench and replace the set screw cover.
Guides that use this video
- 📖Which Faucet Comes With the Ella Royal Walk-In Bathtub?Modèles de baignoires à porte
- 📖How Do I Adjust the Maximum Temperature on a Walk-In Tub Thermostatic Valve?Plomberie et électricité
- 📖How do I set the maximum hot water limit stop on the Ella TCV?Plomberie et électricité
- 📖Which Walk-In Tubs Have Anti-Scald Valves and Temperature Controls?Plomberie et électricité
- 📖What Is a Thermostatic Control Valve and Why Does a Tub Need One?Plomberie et électricité
- 📖Every Repair Video in One Place: Drains, Faucets, TCV, Buttons, Control Boxes, Touchpads, Doors and OzoneDépannage et réparations
- 📖Hand Sprayer Runs Hot but the Tub Spout Is Only Lukewarm: What to CheckDépannage et réparations
- 📖Why Does My Ella Thermostatic Faucet Only Run Lukewarm Water?Dépannage et réparations
- 📖What Should I Do When My Walk-In Tub TCV Fails After the Warranty?Pièces de rechange
- 📖The Thermostatic Control Valve (Anti-Scald): Which Faucets Have It, Its Setting, and Water-Heater AdviceThérapies et fonctionnement
- 📖Does the Ella Fast-Fill Faucet Hold a Set Water Temperature Automatically?Thérapies et fonctionnement
More Troubleshooting & Repairs videos
▶1:00The Deep Cleaning Power of Microbubbles: A Practical TestThe deep cleaning power of MicroBubble therapy in Ella's Bubbles walk-in tubs is demonstrated. The video shows the MicroBubble system in action…3 chapters · used in 1 guide
▶1:39Ella's Bubbles: Digital Touchpad ReplacementA technician demonstrates how to replace a faulty Ella's Bubbles walk-in tub digital touchpad. The process involves removing the old pad…4 chapters · used in 9 guides
▶2:46Drain Cable ReplacementA technician demonstrates how to replace a drain cable on Ella's Bubbles dual four-port t-type drains, which open and close the drains on…5 chapters · used in 7 guides
▶1:10Ella's Bubbles: Cartridge Replacement 5 PieceA technician demonstrates how to replace a cartridge on an Ella 5-piece fast-fill faucet set. This video addresses issues like a dripping faucet or a…4 chapters · used in 12 guides
▶2:09Ella's Bubbles: Control Box ResetA technician demonstrates how to reset the control box for an Ella walk-in tub, showing the steps to disconnect power, locate the config switch, and…6 chapters · used in 13 guides
▶0:44Ella's Bubbles: Relieving Air Lock at the pump connectionRelieving an air lock at the pump connection in your Ella's Bubbles walk-in tub can resolve issues with the hydro massage pump or massage system…used in 4 guides
More Troubleshooting & Repairs videos → All videos → Watch on YouTube →
Vidéos