Ella's Bubbles: Intensity Dial Too Tight

Published mayo 2022 · 0:30

Ella's Bubbles: Intensity Dial Too Tight

Customers can fix a tight or stuck intensity control dial on an Ella walk-in tub by removing excess silicone. This issue may arise from the assembly process and affects all Ella tubs with hydro massage.

If the intensity control dial on an Ella walk-in tub is difficult to turn, it may be due to excess silicone from the assembly process. The video demonstrates how to address this problem, which applies to every Ella walk-in tub model that includes hydro massage.

To fix a stiff intensity control dial, first place protective tape on the tub. Using a straight edge that is not too sharp, remove the dial. Then, simply wipe away any excess silicone from around the ring. Once the excess silicone is cleared, snap the dial back into place.

After this adjustment, the intensity control dial should turn without any difficulty. This simple fix can resolve issues where hydro massage jets feel too strong or too weak because the dial will not turn.

  • Protective tape
  • Straight edge
  • Remove dial
  • Wipe excess silicone
  • Snap dial back on

Step by step help for this topic: Adjusting Jet Pressure, Foot Jet Nozzles, and a Stiff Intensity Control Dial, What Is the Intensity Control Dial on a Walk-In Tub? and Hydro massage vs air massage: what each system does and how to use the controls.

Video transcript1 paragraph · 0:30

if the intensity control dial on your ella walk-in tub is tight and difficult to turn it may be due to excess silicone from the assembly process after placing protective tape on the tub and using a straight edge that's not too sharp remove the dial and then simply wipe excess silicone from around the ring then you can snap the dial back on the dial should now turn without any difficulty

Guides that use this video

More Troubleshooting & Repairs videos

More Troubleshooting & Repairs videos →    All videos →    Watch on YouTube →

¿Sigues atascado?

Abre un ticket y nosotros nos ocupamos del resto.

Abrir un ticket de soporte