Support Center / Videos / Ella's Bubbles: Three Fold Shower Screen Assembly
Back to Videos

Ella's Bubbles: Three Fold Shower Screen Assembly

Published March 2023 · 2:54 · 6 chapters

Chapters in this video
  1. 0:00 Introduction to Shower Screen Conversion This video demonstrates how to convert an Ella's Bubbles four-panel shower screen into a three-panel shower screen.
  2. 0:12 Removing the Inside Panel The technician carefully lays the four-panel door down and removes the inside screws and plastic retainer inserts from the third panel.
  3. 1:02 Detaching the Third Panel The third panel is now completely free and can be removed from the shower screen assembly.
  4. 1:25 Reconnecting the Panels The technician brings the outside panel to connect with the middle panel, keeping the spacer in place, and reconnects the hinge.
  5. 1:47 Securing the Connections The plastic retainer inserts are replaced and secured with screws, ensuring all connections are tightened properly.
  6. 2:16 Final Touches and Installation The screw caps are snapped on, and the three-panel door is now ready for installation or combination with other Ella's Bubbles products.

A technician demonstrates how to convert an Ella's Bubbles four-panel shower screen into a three-panel screen. Customers learn to easily customize their walk-in tub setup for a perfect fit.

Video transcript

Generated from the video's audio, so a word here and there may be off. Chapters above jump to the matching moment.

here's a video on how to make the lf4 panel glass door a three panel glass door by simply removing one of the inside panels lay the four panel door carefully down on a soft surface Elevate the third panel from the wall side as seen here and remove the inside screw do the same on the other side removing the outside screw take any long screw you may have and remove the plastic retainer insert as seen here this releases the panel connection do the same on the other side go to the other side of the four panel door and repeat the exact same process remove the screw on the third panel and then remove both plastic retainer inserts third panel is now free and can be removed completely here's how the open end should look on both sides foreign plastic spacer making sure the other spacer remains bring in the outside panel to connect with the middle panel keeping the spacer in place reconnect the hinge as shown here it should look like this replace the plastic retainer insert and secure it with the same screw tighten securely but don't over torque repeat the process for all connections the four panel door is now a three panel door finally snap on the screw caps on the top side of the door now it's ready for installation you can click on the link below to see a detailed video explaining the entire installation process you can can utilize the three panel glass door separately or you can use it with our big for two walk-in tub and combine it with a four panel glass shower door foreign

Guides that use this video

All videos →    Watch on YouTube →

Still stuck?

Open a ticket and we will take it from there.

Open a Support Ticket