Support Center / Plumbing & Electrical / Where Is the Drain Port Located on an Ella Walk-In Tub?
Back to Plumbing & Electrical

Where Is the Drain Port Located on an Ella Walk-In Tub?

The drain ports on an Ella walk-in tub are under the tub, on the T-type PVC drain body that sits beneath each 2 inch floor drain, and they are on the side of the tub opposite the door. A right-side door tub has its drains on the left, and a left-side door tub has its drains on the right, as you face the tub. The drain body itself is explained in What Is a 4-Port T-Type Drain on a Walk-In Tub?, and this page shows where to look, how many ports your model has, and what that means for your plumber.

The Drain Opening and the Drain Port Are Two Different Things

People use the word drain for two different parts of the tub, and it helps to separate them before you go looking.

  • The drain opening is what you see inside the tub. It is the 2 inch floor drain in the tub floor, with an overflow above it. On Dual Drain models there are two of each, and each drain has its own opener on the deck.
  • The drain port is underneath. Water leaves the tub through the 2 inch floor drain, drops into the T-type body, and exits through whichever ports your installer has connected to the house drain. The ports are 2 inch connections on that body, and they let the drain line leave in whichever direction your plumbing needs.

Any port that is not used is closed with an end cap that ships in the crate. So when a spec sheet mentions a four-port drain, it is describing connection hardware under the tub, not four drains in the floor. No Ella tub has four drains.

Which Side of the Tub the Drains Are on

The door and the drains are on opposite sides of an Ella walk-in tub. Stand in front of the tub and face it:

  • If the door is on the right, the drains are on the left.
  • If the door is on the left, the drains are on the right.

If you have read or heard that the drains sit on the same side as the door, the rule above is the correct one. It matters most before you order, because the door side you choose decides where the tub's drains land in relation to the drain already in your bathroom floor. The Standard60 is also available with a left or right drain position, which is still one drain, placed on one side or the other.

The installation drawings show the drain connection made from the front of the tub or from the back, and the two positions do not land the same distance from the wall. Measure both against your existing floor drain before you decide which door and drain side to order. If your current drain sits close to the wall, tell your Ella dealer or the team at (800) 480-6850 the distance, so the drawings for your model can be checked against it first.

How Many Drains and Ports Each Family Has

Tub familyDrains in the tub floorDrain body and ports under the tubEnd caps shippedWhat it means for the connection
Dual Drain models: stainless-door, Ultra, outward-swing (except the Front Entry), two-seat and Transfer familiesTwo 2 inch floor drainsEach drain on its own T-type body, four 2 inch ports in totalTwoConnect the ports nearest the house drain, or all four for the fastest drainage
Standard, Standard60, Zen, Zen60 and FlowOne 2 inch drainOne T-type body with two connectable portsOneConnect the side facing the house drain and cap the other, or connect both
Front EntryOne 2 inch drainSingle 2 inch 2-port drainnot listedA single drain connection
LayDown tubsOne drainThreaded brass drain, not a PVC T-type bodynot listedA different drain style from the walk-in families

The difference for you is in how much choice your plumber has. On a Dual Drain tub there are four places the pipe can leave, two under each drain, so a tight space or an awkward house drain location is easier to work around, and more connected ports means more flow. On the single-drain family there are two choices, one on each side of the same body. The background on the two-drain design is in What Is Dual Drain Technology on a Walk-In Tub?, and the single-drain platform is covered in Does the Ella Standard Have Dual Drains?.

How to Find the Ports on Your Own Tub

  1. Look at the tub floor first. Count the drain openings and overflows, one of each on a single-drain tub and two of each on a Dual Drain tub. That tells you how many drain bodies are underneath.
  2. Face the tub and note the door side. The drain bodies are under the opposite side.
  3. Look under the tub with a flashlight. The drain joints are reached behind the front access panel. Each floor drain sits on a T-type body with 2 inch ports facing either direction.
  4. Check every port. A port is either connected to the house drain or closed with its cap. Any port not connected to the house drain must have its cap installed.
  5. Before installation, count the end caps in the parts box: two for a dual-drain tub, one for the Standard family. If a cap seems missing, look inside the tub and under the frame, since every small part is individually wrapped, boxed and packed there.

An uncapped port is one of the reasons a tub can stay dry during a bath and then leave water underneath when the drain is opened. If that is what you are seeing, Why Does My Tub Leak Only When I Let the Water Out? walks through the joints to check, one drain at a time.

What Your Plumber Connects to the Ports

The tub does not ship with P-traps or the tee, wye or reducer that joins the drains to the house line, and the PVC pipe from the tub to the house drain is not included. Those are standard 2 inch PVC parts your plumber supplies based on the space under and around the tub. The owner's manual shows the drain connection both above the floor and below the floor, along with an exploded diagram of the drain.

A 2 inch house drain is recommended where possible, and a Y connector is preferred over a T because fewer sharp turns move water faster. The house drain should be tested for free flow before the tub goes in. Layouts for small spaces, including giving each drain its own P-trap or combining both drains before a single P-trap, are in Connecting the Dual Drains in a Tight Space and What the Drain Package Includes.

Two short videos show these parts. The Dual Drain Technology video shows how the house drain can be connected to all four ports for maximum draining capacity, and how the ports not being used are simply sealed off. The adjustable drain height video shows the drain stem in the tub floor, which can be raised or lowered by loosening or tightening it. The stem must not be loosened too much, or it can fall off and go down the drain.

Video
Watch: The Best Dual Drain Technology for Walk-In Tubs | Ella's Bubbles with chapters and a full transcript.
Video

Watch: Ella's Bubbles: Adjustable Drain Height with chapters and a full transcript.

Video
Video

Common Questions

Are the drains on the same side as the door?
No. The door and the drains are on opposite sides of an Ella walk-in tub. A right-side door tub has its drains on the left, and a left-side door tub has its drains on the right, as you face the tub.
How many drain ports does a Dual Drain tub have?
A Dual Drain tub has two floor drains, and each one sits on its own T-type body, so there are four 2 inch ports in total. Connecting all four to the house drain gives the fastest possible drainage. Many installations connect the two ports nearest the house drain and cap the rest.
What happens to the drain ports that are not used?
Each unused port is closed with an end cap that ships in the crate. Dual-drain tubs ship with two end caps, and the Standard family ships with one. Every port that is not connected to the house drain must have its cap installed, or water can escape under the tub when it drains.
Does a four-port drain mean the tub has four drains?
No. The four-port wording describes the T-type drain body under the tub, which is connection hardware and not a count of drains. No Ella tub has four drains. Dual Drain models have two floor drains, and the Standard, Standard60, Zen, Zen60 and Flow have one.
Can my plumber connect the drain from either direction?
Yes. The T-type body offers 2 inch ports so the drain line can leave in whichever direction your plumbing needs. Your installer connects the ports that face the house drain and caps the others.
Should I measure my floor drain before choosing a door side?
Yes. The door side decides which side the drains are on, and the installation drawings show connections from the front or the back of the tub that do not land the same distance from the wall. Measure both against your existing floor drain, and share the distance with your Ella dealer or the team at (800) 480-6850 so the drawings for your model can be checked.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket