Support Center / Showers, Panels & Accessories / How Do You Install Ella Grout-Free Wall Tile, and How Many Per Box?
Back to Showers, Panels & Accessories

How Do You Install Ella Grout-Free Wall Tile, and How Many Per Box?

Ella's grout-free tongue and groove wall tiles go up without grout: you let them rest flat in the room, score and snap each tile to size, apply adhesive to the back, run a thin bead of silicone at every joint, and snap each row into the one below. On counts, the 12 inch by 24 inch tongue and groove tile comes 8 pieces per box and each box covers 16 square feet, while the larger 25.6 by 14.8 inch marble look panel tile comes in packs of 8 that cover about 21 square feet. The counts for every Ella wall product, including the panel kits, sit side by side in How Many Wall Tiles or Panels Come in an Ella Box or Kit?.

Is This the Right Tile for a Backsplash?

It helps to be clear about what the tile is made for. Ella's grout-free tongue and groove tiles are made for shower and tub surround walls, so the backsplash they are designed for is the wall area around a bath or shower enclosure. Ella's installation video describes them as PVC groutless shower tiles, a simple and stylish way to upgrade a shower or bath enclosure, and it notes that they can be placed over new or existing surfaces. If you are planning the tile for a different wall in your home, that use is not described in the published material, so check with your Ella dealer or the team at (800) 480-6850 before you order.

Two more points help with planning. First, surround walls are never part of the tub package, so tiles are added to the order as their own line, as explained in Does the walk-in tub include surround walls, and what colors are offered?. Second, the tiles are also available on their own for a walk-in shower. You have freedom in the layout too. The tiles can be run vertically or horizontally, and they can be stacked or set subway style, so the same box can give you a calm stacked wall or a classic offset pattern.

Which Walls the Tile Can Go over

The wall behind the tile matters as much as the tile, because the tile is bonded to it. Here is what the guidance allows.

  • Sound existing ceramic tile. The grout-free tile goes right over it with no preparation.
  • Drywall, cement board, OSB or plywood. These are fine once they are primed.
  • Raw concrete or block basement walls. These are not suitable. Do not set the tile directly on them.
  • Wet areas. In a shower or tub enclosure a waterproof substrate is required per your local code, so your contractor should confirm the wall build-up for your area.

For the priming step, What primer or sealer goes on drywall before acrylic shower walls? describes the water-based or oil-based primer and sealer used under Ella wall kits. It also notes that the tongue and groove PVC tiles go over a clean new or existing surface that qualifies as an approved substrate, once the cartons have acclimated in the bathroom.

How to Install the Tile, Step by Step

  1. Acclimate the tile. Unpack the tiles and lay them flat in the room 24 hours ahead of the installation.
  2. Check the wall. Confirm the surface is clean and is one of the approved substrates above, primed where priming is required.
  3. Choose the layout. Decide whether the tile will run vertically or horizontally, and whether it will be stacked or subway style.
  4. Measure, score and snap. Measure carefully, score the tile, then snap it to get the precise piece you need.
  5. Apply adhesive. Spread adhesive on the back of the tile.
  6. Seal each joint. Place a thin bead of silicone at every joint to ensure a watertight seal.
  7. Set and snap. Set the tile and snap it into the row below, so the tongue and groove connection holds the pieces together snugly and securely.
  8. Keep going. Work row after row until the enclosure is done.

The video on this page shows this exact sequence on the Carrara tile: the measuring, the score and snap cut, the adhesive on the back, the thin silicone bead at each joint, and the set and snap that locks one tile into the next. It is short, and it is a helpful thing to share with your installer before the first tile goes up.

How Many Tiles Come in a Box?

The count depends on which tile you choose, and the panel systems are not boxed at all. The table lists the published figures. Where a figure is not published, the cell says so.

Wall productPieces per box, pack or kitPublished coverage or sizeWhat it means for you
12 inch by 24 inch tongue and groove tile8 per box16 square feet per boxThe standard grout-free tile. Buy as many boxes as your walls need.
25.6 by 14.8 inch marble look panel tilePack of 8About 21 square feet per pack. About 0.2 inch thick.A larger tile, so each pack covers more wall.
Interlocking click tileNot listedAbout 16 square feet per boxComes in five colors. Plan by coverage.
Wall panel kits3 pieces up to 12 pieces per kitSold as a kit, not by the boxA fixed set of panels, not a number of boxes.

What the differences mean for you: two tiles can share the same piece count and still cover different amounts of wall. Both boxed tiles above come 8 to a box or pack, yet one covers 16 square feet and the other about 21 square feet. That is why coverage, not piece count, is the number to plan with. Always check the coverage printed for the exact tile you pick before you settle on a box count.

Estimating How Many Boxes to Order

Measure the height and width of every wall surface you plan to cover, in inches. Multiply height by width for each wall, add the results together, and divide by 144 to get square feet. Then divide your wall area by the coverage figure for your tile and round up to whole boxes. Add a box for cuts, or for a wall with a window.

As a starting point, three boxes typically cover a 60 inch alcove around a walk-in tub, and about four boxes is often suggested for a standard tub alcove. Treat both as starting points, not rules. Ceiling height, whether the tile runs all the way to the ceiling, and whether you are covering one wall or three all change the total, so measure your own walls. When you are ready, have the tile name and color, your wall measurements and your delivery address on hand, as laid out in How to Get Pricing and Order Ella Grout-Free Shower Wall Tiles: Measuring Your Walls and Estimating Boxes. Your Ella dealer or the team at (800) 480-6850 will be glad to help you confirm the count.

Video

Watch: Ella's Bubbles: Grout-less Tongue & Groove PVC Carrara Tile Installation with chapters and a full transcript.

Common Questions

Do Ella grout-free wall tiles need any grout?
No, the tiles install without grout. They fit together with a tongue and groove connection, and a thin bead of silicone at each joint gives a watertight seal. Adhesive on the back of each tile holds it to the wall.
How many 12 by 24 inch tiles come in a box?
The 12 inch by 24 inch tongue and groove tile comes 8 pieces per box. Each box covers 16 square feet of wall. Plan your order from the coverage figure and round up to whole boxes.
Can the grout-free tiles go over existing ceramic tile?
Yes. The tiles go over sound existing ceramic tile with no preparation. In a wet area a waterproof substrate is still required per your local code, so have your contractor confirm the wall.
Can I install the tiles on a concrete basement wall?
Not directly. The tiles are not meant to go over raw concrete or block basement walls. They can go over drywall, cement board, OSB or plywood once those surfaces are primed.
How long should the tiles sit before they are installed?
Unpack the tiles and lay them flat in the room 24 hours ahead. This lets them acclimate to the bathroom before you measure and cut. After that, each tile is scored, snapped to size and set.
How many boxes of tile does a tub alcove need?
Three boxes typically cover a 60 inch alcove around a walk-in tub, and about four boxes is often suggested for a standard tub alcove. Your own total depends on wall height and how many walls you cover. Measure your walls, divide the area by the coverage per box, round up, and add a box for cuts or a window wall.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket