Support Center / Plumbing & Electrical / Which Drain Does a Two-Inch Non-Electrical Ella Soaker Walk-In Tub Use?
Back to Plumbing & Electrical

Which Drain Does a Two-Inch Non-Electrical Ella Soaker Walk-In Tub Use?

An Ella soaker uses the same drain hardware as the jetted version of the same model, which is the Ella 2 inch T-type dual port floor drain: two independent 2 inch floor drains, two overflows, and stainless steel cable operated openers with extended handles. It is gravity driven and uses no electric pump, so there is no separate drain model to choose for a non-electrical tub. Which models can be built this way is covered in Can I Get an Ella Walk-In Tub With No Jets at All?, and this page covers the drain itself and how it connects to your plumbing.

The Drain a Soaker Carries

A soaker is molded without jet openings and nothing is installed under the tub, but it keeps the same door, seat, faucet, hand shower and drain hardware as the jetted version of the model. So the drain is not something you select separately when you choose a soaker. It comes with the model.

On most models that drain is the dual setup, made of these pieces:

  • Two independent 2 inch floor drains.
  • Two overflows.
  • Stainless steel cable operated openers with extended handles.
  • A T-type drain body with four 2 inch ports.

Two soaker models are the exception. The Front Entry and the Mobile come with a single drain rather than the dual setup. Both are available as soakers, so if either is the model you are configuring, plan the plumbing around one drain.

Drain Setups and Connection Options at a Glance

Setup or optionFigures from the sourcesWhat it means for you
Dual T-type floor drain, most modelsTwo independent 2 inch floor drains, two overflowsThe standard drain on a soaker, the same as on the jetted version of the model
Single drain, Front Entry and MobileOne drain, size not listedPlan the house connection around one drain on these two models
T-type drain body portsFour 2 inch portsThe drain pipe can run in either direction
Using two of the four portsTwo ports connected, unused side cappedCaps seal the ports you do not use, which suits a house drain on one side
House main drain, recommended2 inchRecommended in the installation video for faster draining
House drain, smaller sizeOne and a half inchesCan be joined with a T or a Y connection, per the installation video

What these differences mean is simple. The tub side of the question is already answered by the model you choose: a dual 2 inch drain on most models, a single drain on the Front Entry and the Mobile. The choices left to you and your plumber are on the house side, namely which ports to use and what size drain line the tub empties into. A 2 inch main drain is the recommended match for the 2 inch tub drains, and a smaller house drain can still be connected.

Why This Drain Needs No Electricity

The drain is gravity driven. There is no electric pump moving the water out, which is exactly why a plain soaking tub needs no dedicated electrical circuit at all. You open the drains with the cable operated handles, and gravity does the rest.

The only electrical item a soaker can have is the optional heated seat and backrest, which runs on its own keypad and needs a 15A 120V GFCI-protected line. Without that option, the soaker is a fully non-electrical tub and the drain works the same way. The upkeep comparison in Soaking Walk-In Tub vs Jetted Tub: Which Is Easier to Maintain? explains what else a soaker leaves out, and What is a soaker tub and how deep does it soak? covers the configuration itself.

The drain matters more on a walk-in tub than on an ordinary bathtub, because you stay seated until the water is gone. The door has to stay closed while there is water inside, so you open the drain, wait, then open the door. That sequence is described in Walk-In Tub Versus a Regular Bathtub: Seven Practical Differences.

How the Ports Connect to Your House Plumbing

The T-type body has four 2 inch ports. That gives your plumber several ways to connect it:

  • The drain pipe can run in either direction.
  • The house drain can connect to either side, or to both.
  • Caps seal the ports you do not use.

The Installation Tips For The Ella Big4One video on this page shows this on a real installation. It shows two different drain configurations and explains that your installer determines which is the most efficient for your house plumbing. It shows a drain setup before and after the two drain system is installed, with individual p-traps on the dual drain system and the new connection to the main drain. In that installation the customer used two of the four ports and capped off the unused side.

The same video recommends 2 inch main drains for faster draining, and notes that a T or a Y connection can be used into a house drain sized at one and a half inches. It also recommends easily accessible shutoff valves placed close to the newly installed tub.

What to Settle with Your Plumber Before the Tub Arrives

  1. Confirm the model and its drain. Check whether your model has the dual setup or the single drain. Your Ella dealer or the team at (800) 480-6850 can confirm the drain and the ports for the exact model and size you are configuring.
  2. Look at the existing house drain. When an old tub and its fixtures are removed, the installation video advises that the drain, the water supply lines and the electrical connections be reassessed.
  3. Decide the port layout. Have your plumber decide which side the house drain connects to, and whether you will use all four ports or two with the unused side capped.
  4. Plan for leveling. Ella tubs have adjustable leveling legs, and the video notes that without proper leveling the door may not function properly and may leak.

The connection to the house drain is work for a local licensed plumber. Ella does not send technicians.

Once the tub is in use, drain care on a soaker is light. With no jet lines, bath salts and oils rinse away with the drain. To keep hair away from the drains, a silicone pop-up drain protector from a hardware store is the team's suggestion, as noted in How Do I Clean and Maintain My Walk-In Tub?

Video

Watch: Ella's Bubbles: Installation Tips For The Ella Big4One with chapters and a full transcript.

Video
Video

Common Questions

Does a soaker tub use a different drain than a jetted tub?
No. A soaker keeps the same drain hardware as the jetted version of the same model. On most models that is the Ella 2 inch T-type dual port floor drain with two overflows.
Does the drain on a soaker tub need electricity?
No. The drain is gravity driven and uses no electric pump, which is why a plain soaking tub needs no dedicated electrical circuit. The optional heated seat and backrest is the one item that needs a 15A 120V GFCI-protected line.
Which soaker models have a single drain instead of two?
The Front Entry and the Mobile come with a single drain rather than the dual setup. Your Ella dealer or the team at (800) 480-6850 can confirm the drain for the exact model and size you are configuring.
Do I have to connect all four drain ports?
No. The house drain can connect to either side or to both, and caps seal the ports you do not use. The installation video shows a tub connected through two of the four ports with the unused side capped.
Can the tub drain into a one and a half inch house drain?
The installation video recommends 2 inch main drains for faster draining. It also says a T or a Y connection can be used into a house drain sized at one and a half inches, and your plumber decides the best layout for your home.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket