Support Center / Door & Seal / How Does the Outward U-Shape Door Latch and Seal Against Water Pressure?
Back to Door & Seal

How Does the Outward U-Shape Door Latch and Seal Against Water Pressure?

The outward U-shape door on an Ella walk-in tub does not count on the water to hold it closed. It seals with a 3-latch gear and shaft mechanism: turning the handle drives three tapered pins into the frame, and the taper pulls the door evenly into its seal, so the seal is just as tight when you close the door on an empty tub as it is when the tub is full. What Is a Gear-and-Shaft Latch (2-Latch and 3-Latch) on a Walk-In Tub? defines the mechanism, and this page follows the door from the moment you pull it closed to a full tub, so you can see what is doing the work at each stage.

Why an Outward Door Has to Seal Itself

Ella builds two kinds of walk-in tub door, and they hold water in opposite ways. An inward-swing door opens into the tub. Once the tub fills, the weight of the water presses that door against its seal, so the water itself helps keep it shut. The inward-swing S-shape and stainless steel doors rely on that water pressure together with an interior handle.

An outward-swing door opens away from the tub, so the water cannot help hold it shut. On an outward door the water is pushing in the same direction the door opens, which means the latch has to do all of the holding and all of the sealing. In Ella's door video the presenter puts it plainly: with an outward swing door you need something to hold back the water in the bathtub, and you need a robust seal. Ella's answer is a door he compares to a vault door. You close it, the pins come out, and everything inside stays inside.

The U-shape version of this door is built from white plastic composite with a tempered glass panel, swings outward through a 165 degree arc, and is fitted to the Capri, Monaco, Front Entry, Mobile, Lounger, Shak, Big4One, Tub4Two and Big4Two.

What Happens Inside the Door as You Turn the Handle

The handle is connected to a shaft, and gears on that shaft move the locking pins. When you pull the door closed and begin to turn the handle, this is the sequence:

  1. The gears on the shaft begin to push three tapered pins out of the door toward the openings in the striker plate on the frame.
  2. At the start of the handle's travel the pins need only light pressure, because the taper is just beginning to enter the frame. The video describes this as a very gentle amount of pressure to get the door started.
  3. As you continue to rotate the handle, the widening taper of each pin draws the door toward the frame. The video shows the handle rotating a full 180 degrees, with the tapered pins doing the work.
  4. When the handle completes its rotation, the pins are seated fully in the jamb and the door has been pulled evenly into the seal all the way around.

The taper is the important detail. A straight pin would only stop the door from swinging open. A tapered pin also pushes the door tighter against the gasket the further it travels, which is how one turn of the handle both locks the door and compresses the seal. Because there are three pins spaced along the door, that pressure is spread around the U shape. Ella's door comparison graphic contrasts this 3-latch door with the industry-standard single-latch door for that reason.

The design also means little strength is needed. The video demonstrates the door for bathers with limited mobility: a light push to start it, then the rotation of the handle does the rest.

What Holds the Water Once the Tub Is Full

Because the pins compress the seal mechanically, nothing changes at the door as the tub fills. The video states that the seal is just as tight when you close it as it will be when the bathtub is fully full of water, and that the door does not move or shift as the water rises. The seal you get is the seal the handle set, before the first gallon went in.

That gives you a simple check before you open the faucet. On a U-shape door the handle faces away from the hinges when the door is unlocked and toward the hinges when it is locked. If the handle has landed fully toward the hinges, the pins are seated. A handle left halfway means the seal is only partly compressed, and a rising tub will not finish the job for you the way it would on an inward door.

The same independence from the water explains the most important rule for this door. The pins retract only when the handle is rotated fully back to the open position, and the water does nothing to stop that rotation. The handle sits on the outside of the door, where it is harder for the bather to reach, so accidental opening is unlikely, but the door can be unlocked while the tub is full. Every Ella's Bubbles manual gives the same instruction: never open the door until the tub has completely drained. Can an Outward-Swing Walk-In Tub Door Open Before the Water Drains? covers that rule in detail, and Can Someone Open the Walk-In Tub Door While It Is Full and Flood the House? looks at households with a helper, a child or a bather with dementia.

What the Seal Depends on: A Level Tub and an Aligned Door

A latch that sets the seal by position depends on the pins meeting the striker plate squarely. The mechanism depends on alignment more than anything else, and there are three things to look after.

  • Every leveling leg on the floor. Ella tubs have at least six leveling legs, and each must rest solidly on the floor with no gap beneath it. When a leg hangs free the shell bows, the door rubs the jamb, the pins drift away from the striker plate openings, and the gasket may not touch on the lower handle side, which is where most door leaks begin.
  • A full handle turn, every time. The lock has no screw that tightens or loosens the pins, so the only way to get full compression is to complete the rotation. A door that has to be forced is telling you something upstream is wrong, usually the level of the tub.
  • No weight on the door. Never lean on the open door or use it to steady yourself. The door and seal warranty is valid only when the alignment of the tub and door is correct and has not been changed by a bather's weight.

If the handle feels stiff or loose, the handle lock nut behind the front apron is the part that is set so the handle moves smoothly yet still pulls the door firmly into the seal. How do you adjust the 3-latch gear lock on an outward-swing door? lays out, in order, what you can adjust and what you must not touch.

How the U-Shape Door Relates to the L-Shape Transfer Door

The Transfer family uses the same family of mechanism with one difference in count. The L-shape aluminum door on the Transfer26, Transfer30, Transfer32, Transfer60 and TransferXXL has a 2-latch gear and shaft: its handle sits on the front of the door and turns clockwise to push two tapered pins into the frame. The U-shape door uses three. The principle is identical on both, tapered pins compress the seal evenly, the seal is just as tight with the tub empty as with it full, and the door must never be opened until the tub has completely drained. What Is an L-Shape Transfer Door on a Walk-In Tub? describes that door and its 172 degree swing.

If your U-shape door does not seal the way this page describes, check the legs and the handle position first. Then contact your Ella dealer or the team at (800) 480-6850, or open a ticket at ellasbubbles.com/support, with your model name, your order details from where you purchased, and photos of the pins, the striker plate and the handle in the locked position.

Video

Watch: Advanced Door Locking System for Walk-In Tubs for Maximum Safety: Voted Safest 2020 | Ella’s Bubbles with chapters and a full transcript.

Video
Video
Video

Common Questions

Does water pressure help hold an outward U-shape door closed?
No. An outward-swing door opens away from the tub, so the water cannot help hold it shut. The door relies on its 3-latch gear and shaft mechanism, with three tapered pins driven into the frame. Inward-swing doors are the ones held against their seal by the water.
Does the U-shape door seal get tighter as the tub fills?
No, and it does not need to. Ella's door video explains that the seal is just as tight when you close the door as it will be when the bathtub is fully full of water. The tapered pins set the compression when you complete the handle turn.
How can I tell that all three pins are seated?
Look at the handle. On a U-shape door the handle faces away from the hinges when the door is unlocked and toward the hinges when it is locked. A handle left halfway means the seal is only partly compressed, so complete the turn before you fill the tub.
Why are the locking pins on the door tapered?
The taper lets the door start closing with only light pressure, because the narrow end of each pin enters the frame first. As the handle completes its rotation, the pins seat fully and the taper pulls the door evenly into the seal all the way around.
Is there a screw that tightens the 3-latch lock?
No, there is no adjustment screw on the 3-latch gear and shaft lock itself. The lock is right when the tub is level on every leg, the handle completes its full turn, and the handle lock nut behind the front apron is set so the handle moves smoothly yet still pulls the door firmly into the seal.
Can the U-shape door be unlocked while the tub is full?
Yes, it can, because the pins retract whenever the handle is rotated fully back to the open position and the water does not prevent that. The handle is on the outside of the door, away from the bather, which makes accidental opening unlikely. Every Ella's Bubbles manual says never to open the door until the tub has completely drained.

About this guide. Answers in the Ella's Bubbles Ella's Bubbles Walk-In Tub Support Center are compiled from real conversations with owners, our technicians’ notes and the product documentation, then reviewed by our team. Models and options have evolved over the years, so a detail here may differ slightly from yours. If something looks different on yours, send us your serial number and a specialist will confirm it for your model.

Was this helpful?

Did this solve your question?

If not, open a ticket and our team will pick it up from here.

Open a Support Ticket